|
|
Post by jareeb on Sept 10, 2014 10:07:22 GMT -5
currently as it sits now it has a gy6 50 or 139qmb with a big valve head, big cam, 80cc bbk, aftermarket var.,and 1k springs. it will do 50ish mph no problems at all. my plans for that engine were to raise the comp and run it on e85 and put upgears in it. and hoping to hit 65mph which is very doable. but its just no a 2 stroke. im only a fan of 4 strokes when there is 4 or more cylinders. so i went back to 2 stroke. bought this 40qmb for $40 over a year ago. plans for the engine are 70cc big bore w/ported jug. for the rest of this season ill be using a $99 pipe from ebay. thats where ill will start to have it done before this years twist and gone. (i race one of if not the fastest scooter in the midwest. ran a 8.54 @ 74.XXmph in the 1/8). im very thankful to get to race someones else's hard work and money. some pics of that racers. i can post of my time slip if people wana see it. (note my name isnt on the bike)    anyways back to my scooter.   thats about all i have for you guys for now. more soon. |
|
|
|
Post by jareeb on Sept 10, 2014 10:13:34 GMT -5
build thread over at spreenet. yes a was going to supercharge this thing but there isn't enough room to get the plastics back on.
|
|
|
|
Post by 2strokd on Sept 10, 2014 10:40:37 GMT -5
Ive had a thing for Spree,s since the early 90,s when i got my first one. Same color, year as yours...
Ide love to build one up with an AF18 or something close. Cool scoots!
|
|
|
|
Post by Clank on Sept 10, 2014 10:44:54 GMT -5
Do you have a steering stabilizer on that lil rocket? I dig the racing leathers, bomber jacket & Levis. Redneck racing gear, well at least were I'm from. Love it.
:thewave:
|
|
|
|
Post by jareeb on Sept 10, 2014 11:07:53 GMT -5
i love sprees to. i wanted to find a dio engine but its impossible here. im not sure whats all on it. but it feels very safe ive put many passes on it. my bbk just showed up... then sent me a stock 49cc replacement cylinder kit. damnit ebay!
|
|
|
|
Post by jareeb on Sept 11, 2014 12:11:10 GMT -5
my $99 dollar pipe showed up. it doesn't look as bad as i thought. some things im going to change on it. the "U" shaped bend to the silencer is very tight and small dia. ill get a new bigger "u" pipe for it and weld it on. there is also excess metal at the jug side inside the pipe a little ways i can feel it with my finger. does anyone know if the expansion chamber has any restriction material in it?
|
|
|
|
Post by jareeb on Sept 12, 2014 11:01:54 GMT -5
ve1e40qmb found my engine code!
|
|
|
|
Post by jareeb on Sept 12, 2014 12:11:14 GMT -5
|
|
|
|
Post by jareeb on Sept 14, 2014 11:34:26 GMT -5
got a stage6 big bore. not sure which one its a black cast iron. o ring head. need to find gaskets for it and a piston. also got a stage6 clutch and bell.
|
|
|
|
Post by jareeb on Sept 16, 2014 8:56:20 GMT -5
|
|
|
|
Post by jareeb on Sept 17, 2014 10:05:23 GMT -5
big thanks to niz76 for the rear wheel.   still need to find an axle nut. also anyone know the dimensions for the bolt that goes threw the bar to mount the engine to the frame? or if anyone has one? |
|
|
|
Post by niz76 on Sept 17, 2014 12:51:24 GMT -5
Awesome man glad it fit!
Weird- I looked at partsforscooters.com and they have the shaft setter rod, but not the big bolt that runs through it... it's not even shown in the parts diagram.
|
|
|
|
Post by jareeb on Sept 17, 2014 13:03:07 GMT -5
yea i saw that to. also if anyone is having trouble finding a nut. the one of my 139qmb is the right size. mocking up the engine to the frame as we speak! and my gears are 11:1 ratio
|
|
|
|
Post by jareeb on Sept 17, 2014 14:16:33 GMT -5
as far as i got. need to get that bolt and some metal to work with.   |
|
|
|
Post by birdman on Sept 17, 2014 16:37:35 GMT -5
 very nice very nice |
|
