|
|
Post by daath on Mar 3, 2015 10:17:47 GMT -5
I'm going to be changing out the spark plug on the solana and it has a tiny torch a7rtc plug in it and am wondering what would be the NGK equivalent of it.
|
|
|
|
Post by daath on Mar 3, 2015 10:55:43 GMT -5
 That's the plug for the solana. I think it may be fouled out.  |
|
|
|
Post by daath on Mar 3, 2015 12:11:35 GMT -5
I just found out what the ngk equivalent is. It's a ngk cr7hsa or cr7hix
|
|
|
|
Post by blaq on Mar 3, 2015 17:23:02 GMT -5
That's the plug for the solana. I think it may be fouled out. [url=http://postimg.org/image/8i5z9eucf/ [/url] [/quote] Even though your plug may be fouled out you can still use it by grabbing a wire brush and going over it for about 5 minutes she will then be looking almost new |
|
|
|
Post by daath on Mar 3, 2015 17:30:18 GMT -5
I'll have to get a wire brush. I've gotten a lot of the carbon off of the plug and will be putting it back on tomorrow when it's a bit warmer. My wife has me on lockdown from working on it for the rest of the day
|
|
|
|
Post by scooterpimp on Mar 3, 2015 17:39:51 GMT -5
Your better off changing the plug to a ngk, those china plugs aren't the best quality. Auto parts stores have standard ngk plugs for a few bucks.
|
|
|
|
Post by daath on Mar 3, 2015 17:41:19 GMT -5
I found adv has it for around $2.00 so I'll be getting one from there.
|
|
|
|
Post by scooterpimp on Mar 3, 2015 17:44:06 GMT -5
Ngk part #4549. =cr7hsa
|
|
|
|
Post by daath on Mar 4, 2015 11:50:56 GMT -5
I've got the ngk plug and it looks good. I'll be installing it after I eat then giving it a try.
|
|
|
|
Post by daath on Mar 4, 2015 11:55:11 GMT -5
|
|
|
|
Post by Fox on Mar 4, 2015 12:49:41 GMT -5
If you go somewhere and all they have is a C7HSA those are fine too. It's a non resistor version of the same plug.
|
|
|
|
Post by daath on Mar 4, 2015 17:55:22 GMT -5
Cr7hsa is the one I have in there and so far so good. I just changed the main jet (was 130 now 82) and I now have to readjust the carb for the new jet. The project is slowly coming together. After I get the motor running good I'll have to work on the lighting and get those in order. I'll probably just get new switches and wiring harness for it. I'm learning a lot as I go and it's fun and frustrating at the same time.
|
|
