|
|
Post by thatcrazyguy on Sept 28, 2015 12:07:05 GMT -5
|
|
|
|
Post by 90GTVert on Sept 28, 2015 21:15:56 GMT -5
Maybe one from a Yamaha with the Minarelli will work?
5GD-25357-00-00 SPRING, LEVER RETURN
|
|
|
|
Post by thatcrazyguy on Sept 28, 2015 21:36:14 GMT -5
Maybe one from a Yamaha with the Minarelli will work? 5GD-25357-00-00 SPRING, LEVER RETURN Googled but no images |
|
|
|
Post by 90GTVert on Sept 28, 2015 23:19:59 GMT -5
|
|
|
|
Post by thatcrazyguy on Sept 29, 2015 17:14:07 GMT -5
Ok, hey Brent, I found the spring I was looking for in my magnetic tray where I put all of my important metal parts. Lmfao I iverlooked it 3-4 times  Can someone please take a picture of there rear brake drum assembly on the left side of the case where the brake line ends so I can see how to install the spring  thanks |
|
|
|
Post by thatcrazyguy on Sept 29, 2015 19:43:28 GMT -5
Found my spring and got it installed had my son help me hahaha Tomorrow is running the brake line thru and putting the new valve stem in hopefully |
|
|
|
Post by thatcrazyguy on Oct 5, 2015 14:08:47 GMT -5
Here is a first look at my 103cc Vento Zip, looks like a piece of shit but I'm ready for some street races!!!!! youtu.be/6yaiSAz_hU4I can't figure out the breaks for the life of me, I tried multiple combinations of break shoes that I had and none of them get it to where the tire won't turn, not sure wtf is wrong. Also, what is that rattling sound coming from the cvt? Possibly a bearing or mayb the clutch bell? Had this scoot up to 47.4 mph gps'd within 150 yards and still plenty of engine left to accelerate but my lack of breaks left me with about 400 yrds of street to stop, so I gave up on the test run!!! More to come though. Just need some time to figure out my breaks |
|
|
|
Post by 90GTVert on Oct 5, 2015 15:41:49 GMT -5
Could be contact somewhere like perhaps the bell or pulley and the cover, or maybe it's starter clutch parts jingling. You'd need to pop the cover off and look for signs of contact, anything loose enough to rattle, and see if the cover bearing makes noise or feels loose or gritty.
|
|
|
|
Post by thatcrazyguy on Oct 5, 2015 21:51:26 GMT -5
Could be contact somewhere like perhaps the bell or pulley and the cover, or maybe it's starter clutch parts jingling. You'd need to pop the cover off and look for signs of contact, anything loose enough to rattle, and see if the cover bearing makes noise or feels loose or gritty. Thanks Brent, ill check it out tomorrow, for now I have enough brakes for a 7 mile ride to work in the morning, hit 51mph tonight  |
|
|
|
Post by thatcrazyguy on Oct 6, 2015 12:46:51 GMT -5
Where can I find a front hydraulic brake assembly kit for a 2003 Vento zip? Need the lever and all!!!
|
|
|
|
Post by 90GTVert on Oct 7, 2015 7:38:50 GMT -5
Last time I bought a whole caliper to master cylinder/lever assy it was from eBay. Search "scooter front brake assembly" and quite a few will come up. Go through and look at pics to make sure they match up to what you need.
|
|
|
|
Post by thatcrazyguy on Oct 7, 2015 8:30:40 GMT -5
Last time I bought a whole caliper to master cylinder/lever assy it was from eBay. Search "scooter front brake assembly" and quite a few will come up. Go through and look at pics to make sure they match up to what you need. I found one for a Vento zip for 59.99$ and free shipping I think. I'm trying to sell some scooter parts to cover that cost. Had cable company come jnstall services yesterday so today I have to inspect the cvt for that rattling sound. Would also love to fill my 5gal gas tank and mix it up so I'm not doing it on the go and have inaccurate mix ratings. |
|
|
|
Post by thatcrazyguy on Oct 7, 2015 18:18:59 GMT -5
Well, got to work on my scooter today. Hooked up the battery so I have lights , but my headlight does not work with a new bulb in it, and my new left hand switches are messed up, I turn my turn signal on and the horn just honks haha. So some re-wiring will be needed, or I can just say FTP and don't use my turn signals. I also found out what the rattling is in cvt, the kick start gear moves a little bit, that pole that the kick start itself goes on, and the variator fan is rubbing up against that. I'll have to throw a washer or 2 on it tomorrow. Still can't get my rear brake to work at all, not sure wtf is wrong.   |
|
|
|
Post by thatcrazyguy on Oct 8, 2015 5:52:21 GMT -5
Blew my fuckin piston today on my way to my bosses house 2 miles from my house. -.- wtf!!!
|
|
|
|
Post by Lucass2T on Oct 8, 2015 5:58:12 GMT -5
oh boy..what happened?
|
|
thanks
