|
|
Post by jcroz88 on May 1, 2015 17:54:09 GMT -5
I'm going to replace my factory carb and I don't know what size to get. Also I can't get to my scoot to look up any numbers off the carb or measure so I was wondering what size I need to order. Also if I can go bigger with everything else stock, and it benefit me, how big?
|
|
|
|
Post by jcroz88 on May 2, 2015 8:54:00 GMT -5
no one? Does 18mm sound right?
|
|
|
|
Post by 90GTVert on May 2, 2015 16:31:32 GMT -5
18-20mm should work well. I don't think you'll really see a difference between those sizes. Stay away from the really big carbs, like the 150cc carb swaps... that's too much.
|
|
|
|
Post by jcroz88 on May 3, 2015 13:29:02 GMT -5
Thanks man!
|
|
|
|
Post by humanshield on May 3, 2015 13:35:36 GMT -5
Agree with Brent.
I have a 100cc kit and the 18mm carb works fine...just limits top end a bit imo.
The biggest problem is that 18mm carbs are everywhere dirt cheap. 19mm carbs are a tad harder to find....TRUE 20mm GY6 specific carbs do not exist (imo)
|
|
|
|
Post by Fox on May 3, 2015 15:16:06 GMT -5
|
|
|
|
Post by jcroz88 on May 4, 2015 11:21:34 GMT -5
Dang I hope it is. I ordered it Saturday after waiting for a response. I guess I'll know when it gets here this week.
|
|
|
|
Post by jcroz88 on May 4, 2015 11:23:20 GMT -5
|
|
|
|
Post by jcroz88 on May 4, 2015 11:23:53 GMT -5
Agree with Brent. I have a 100cc kit and the 18mm carb works fine...just limits top end a bit imo. The biggest problem is that 18mm carbs are everywhere dirt cheap. 19mm carbs are a tad harder to find....TRUE 20mm GY6 specific carbs do not exist (imo) How does the 100cc compare to factory? |
|
|
|
Post by Elektrey on May 4, 2015 11:31:47 GMT -5
you linked a battery.
IIRC 100cc kits are like actual 80 something cc. It should help out a lot with acceleration and some top end, but it will reduce reliability as it will wear out the crank a lot quicker with all of the extra stress and heat.
|
|
|
|
Post by jcroz88 on May 5, 2015 13:20:09 GMT -5
|
|
|
|
Post by Elektrey on May 5, 2015 13:30:15 GMT -5
looks good assuming it fits correctly, which it probably will (?) since its GY6
|
|
|
|
Post by jcroz88 on May 6, 2015 11:41:38 GMT -5
It should!
|
|
|
|
Post by Fox on May 6, 2015 21:20:03 GMT -5
That'll work. I'm curious as to how fast the shipping is from that place cause it's like about 8 miles from my house and I have never used them before. Let us know when you get it. It says same day shipping so I should get stuff 2 days tops from them I would think.
|
|
|
|
Post by jcroz88 on May 7, 2015 6:40:34 GMT -5
That'll work. I'm curious as to how fast the shipping is from that place cause it's like about 8 miles from my house and I have never used them before. Let us know when you get it. It says same day shipping so I should get stuff 2 days tops from them I would think. I ordered it Saturday night, or Sunday morning, and it was delivered yesterday. Pretty fast and I'm in south Carolina lol. |
|
