|
Post by Fox on Jul 27, 2015 20:53:13 GMT -5
Magnet on a stick is also a good plan. You can shove it in between the crank halves and down the cam chain hole with the engine still in the scooter. Might get lucky and snag that nut. Just make sure you don't lose the magnet in there.
Frankly, that nut is pretty small and if you've seen an engine apart the n you know there are many nooks and crevices it can lodge itself into where it would probably stay put forever but there is the potential it could get stirred up in there and cause some damage.
|
|