|
|
Post by 180°off on Jan 11, 2016 17:18:23 GMT -5
|
|
|
|
Post by drbob on Jan 11, 2016 17:28:50 GMT -5
I googled some images, by the looks or rims and dash and etc. Appears to be a 2010 Honda sh150i, pictures look the same, even the little windscreen and such
|
|
|
|
Post by drbob on Jan 11, 2016 17:34:28 GMT -5
|
|
|
|
Post by 180°off on Jan 11, 2016 18:06:55 GMT -5
Yep that looks like it. I'll change the headung
|
|
|
|
Post by drbob on Jan 11, 2016 18:37:25 GMT -5
Great deal if you can get it running and legal
|
|
|
|
Post by 90GTVert on Jan 13, 2016 10:32:32 GMT -5
Timing should be similar to most other small 4Ts. Hopefully if it has a valve timing issue, there has been no contact between the piston and valves.
|
|
|
|
Post by tiny on Jan 14, 2016 4:26:15 GMT -5
Parts for a Sh150i will be hard to come by. it was only sold for one year in north america too expensive.
|
|
|
|
Post by 90GTVert on Jan 14, 2016 7:32:41 GMT -5
Has it got the body panels with it? Hope so. I looked up just the seat and underseat bucket on a Honda parts side and just those are ~$160. Do some searching and see what you're getting into before you dump much into it. For what you paid, you may be able to part it out and make a profit if all else fails.
|
|
|
|
Post by 180°off on Jan 17, 2016 16:24:16 GMT -5
Thats what I plan to do. The guy said all it needs is timing. If it needs anymore than Im just going to try selling as is or part it out. I know of a guy in tennessee that has an aprilia sr 50 ditech playstation edition that cant seem to figure out why he cant get any power. I figure he may not be so mechanically inclined. If i can get this thing to run Im betting he will trade and come to me. I think this honda is a 2010 and if so it was a 4000 dollar bike brand new. So it would be a fair trade I believe, maybe he will get the better? No he wont! that aprilia is bad ass! iLL HAVE TO BUY A SUPER KRYPTONITE lock for it. Shit im day dreaming again.
|
|
|
|
Post by 180°off on Jan 18, 2016 8:40:58 GMT -5
Picking my Honda up today! I'm so excited, I just wanna ride it !
|
|
|
|
Post by tiny on Jan 18, 2016 16:33:59 GMT -5
If it has all body parts and just needs the timing done thats one hell of a deal. Just be careful it is fuel injected.
|
|
|
|
Post by 180°off on Jan 19, 2016 0:34:22 GMT -5
Well it's all there. The only thing I can see missing is a small plastic panel on the front. He may still have it buy just didn't see it? I thought it had rear disc but I guess not.And no key, I'm going to get the vin off it tomorrow and see if it was stolen. I bought it from scrap yard, have Bill if sale but if it was stolen I would like to give it back. As long as I get my 100 back to. I mean the radiator alone I could sell for over 100 so nothing but profit from here on out. Here are some more pics.
|
|
|
|
Post by 180°off on Jan 19, 2016 0:54:43 GMT -5
|
|
|
|
Post by 180°off on Jan 19, 2016 15:08:11 GMT -5
Ok, I can not find hardly anything online about this Honda and fixing them? Trying to find out how to get to tdc and it's a pain in the ass! No where can I find it. I guess I'm either going to have to buy a repair manual or?? Just wing it. I think the person who had it may have adjusted the valves and did it backwards(cam off 180) but I am unsure. I don't see how it would jump timing. Well there went 2 hours of my life!
|
|
|
|
Post by cwazywazy on Jan 19, 2016 15:24:37 GMT -5
$100 for a water cooled injected 150cc? Damn, that's a good deal even if it doesn't run.
Does the flywheel and cam have markings on them similar to a GY6 or what?
|
|
