|
Post by lilpinny on Jul 13, 2019 7:56:45 GMT -5
To make up for the trouble I had on 48hrs. A real GPS thatbwill serve as an oddometer and speedo. And a GoPro that won't jump around as much like the hero 4 session. The hero 4 session is now a hot wheel
|
|
|
Post by 90GTVert on Jul 15, 2019 8:16:20 GMT -5
6 more GoPro batteries. That makes 10 in the last 2 weeks. I took a trip yesterday and used one old battery that was swollen. Went to remove it and the little tab to pull it out ripped off. Luckily I had my 2nd GoPro just in case. Pried the battery out at home and tossed out other swollen batts this morning.
|
|
|
Post by aeroxbud on Jul 15, 2019 19:39:55 GMT -5
New stator. Seems to be playing up. Not much left that's not new now! 😆
|
|
|
Post by lilpinny on Aug 4, 2019 14:09:12 GMT -5
Dr. pulley HiT clutch. Now I have a Dr pulley varilator and clutch which I know are performance parts... But gosh, the NCY stuff looks so much nicer on an open CVT. Ah well... Maybe I can grind the drive face down and PC the outside of the clutch bell.
|
|
claydoh
Scoot Enthusiast
Posts: 172
|
Post by claydoh on Aug 4, 2019 18:31:25 GMT -5
I recently ordered a set of Pirelli Angel scooter tires from Revzilla. There was a $30 discount on Pirelli sets (gone now), so it was $43 for the pair. Plus, I had a gift card so it was nearly free in the end!
|
|
|
Post by oldgeek on Aug 5, 2019 18:36:56 GMT -5
Its sooo big! Lol I had to return a cylinder order, so I ended up with a big credit and the only logical thing to do was send them even more money and get this pipe that I do not need ......Yet!
|
|
|
Post by FrankenMech on Aug 5, 2019 21:00:57 GMT -5
Have you ever scoped the inside of one of those pipes to see what the welds look like? -Just wondering...
|
|
|
Post by oldgeek on Aug 5, 2019 21:48:40 GMT -5
Have you ever scoped the inside of one of those pipes to see what the welds look like? -Just wondering... I broke my fluke borescope, So I am thinking of getting one of the $35 bore scopes you connect to your smartphone.
|
|
|
Post by FrankenMech on Aug 5, 2019 23:13:16 GMT -5
I figure if they weld one section at a time they could use a die grinder on the inside.
|
|
|
Post by fuzzyruttin on Aug 6, 2019 5:27:15 GMT -5
FWIW the sectional welds on my exhaust were not smoothed out. It's fabricated by a drifting team, most likely devised for their pit bikes.
|
|
|
Post by FrankenMech on Aug 6, 2019 12:37:24 GMT -5
FWIW the sectional welds on my exhaust were not smoothed out. It's fabricated by a drifting team, most likely devised for their pit bikes. Ouch, restriction time...
|
|
|
Post by 90GTVert on Aug 6, 2019 13:31:14 GMT -5
The Peace Pipe made by 190mech is smooth inside and it doesn't look like he's been grinding anything. My header broke and it got cut off so I could see. Where I patched it; awful. Where he built it, beautiful. I don't know what he does now, but he used to use oxy/ace and old clothes hangers. Even the pro welder down the street said that you have to be an artist to do that kind of work. John is a bad mutha.
|
|
|
Post by pete130 on Aug 9, 2019 5:13:06 GMT -5
Finaly found a better gearup kit for aerox 100cc was looking at 15/42 stock is 15/48 but I managed to find a 15/40 2.666 final drive I have big bore kit and it just runs out of legs so fast lol will be good to sleep difference hope it's not to big
|
|
|
Post by dexameth on Aug 9, 2019 15:24:21 GMT -5
A new piston for Stella's 177 kit
|
|
|
Post by milly on Aug 10, 2019 13:07:12 GMT -5
Lots of random bushes and nylon gear and throttle bits and other random stuff for Violet the Vespaclone. So much I have forgotten what I did order.
|
|