|
Baotian
Sept 7, 2017 10:41:44 GMT -5
Post by Delpzie on Sept 7, 2017 10:41:44 GMT -5
The one i have is bosch and it was old used pump, i got it from a friend he gave it for me,the pump was used a lot thats why the brushes were wasted.
Here it is.
|
|
|
Post by Delpzie on Sept 8, 2017 11:39:08 GMT -5
|
|
|
Baotian
Sept 8, 2017 15:56:45 GMT -5
Post by spaz12 on Sept 8, 2017 15:56:45 GMT -5
Looks really good
|
|
|
Baotian
Sept 8, 2017 20:05:52 GMT -5
Post by Delpzie on Sept 8, 2017 20:05:52 GMT -5
Soon will look even better i plan to paint it , btw problems never end the guy that was installing the brushes on the pump didnt install them right the pump stops working , when i tap it with something starts working, also i drove like 20min before this started happening and the temps are really good now its around 60-65celsius and the scooter rips, i will fix the brushes myself tomorrow.
|
|
|
Baotian
Sept 9, 2017 15:30:57 GMT -5
Post by spaz12 on Sept 9, 2017 15:30:57 GMT -5
Paint it?! That's one of the things I most like about that scoot, is the paint and decals. Well, hopefully you make it look even better.
|
|
|
Post by Delpzie on Sept 9, 2017 18:35:18 GMT -5
Haha man everyone are saying that and are like you are crazy if u paint it, i dont like this paint also has some scratches on the sides when i fell off the scooter 2years ago, i plan to make it full black with white rims also have a lots of stickers waiting
|
|
|
Baotian
Sept 18, 2017 5:37:27 GMT -5
Post by Delpzie on Sept 18, 2017 5:37:27 GMT -5
I`m watching this pulley what do u think about it guys? The price is really cheap compared to the s6/malossi/polini overrange pulleys,also i dont know where its made too and idk if it will be good with the malossi overrange vario, but in the future i might get the new yasuni pro race vario who knows.
|
|
|
Baotian
Sept 18, 2017 5:40:50 GMT -5
Post by 90GTVert on Sept 18, 2017 5:40:50 GMT -5
I`m watching this pulley what do u think about it guys? The price is really cheap compared to the s6/malossi/polini overrange pulleys,also i dont know where its made too and idk if it will be good with the malossi overrange vario, but in the future i might get the new yasuni pro race vario who knows. Seems like it's worth a try. Either pair that with the OR vari or buy a whole OR kit. The prices to buy name brand OR rear pulley assemblies alone is ridiculous.
|
|
|
Post by Delpzie on Sept 18, 2017 6:28:23 GMT -5
I already have overrange Malossi vario brand new bought and currently on the scooter ... with 16,5mm polini belt and stock pulley it needs 2mm more to go to the top for max topspeed.
|
|
|
Post by Delpzie on Oct 15, 2017 15:10:56 GMT -5
I got same pump as last one , now temps on full throttle 2km goes up to 78celsius , today we had scooter meeting in our town , uphill max temp was 85 celsius , also i put the MHR Team clutch bell today as well, here is video of the scooter and some pictures from mine and VlatX`s twin www.youtube.com/watch?v=-ysUJDaO0ps (Camera is sh## btw) Still need to fine tune the carb and I definitely need to buy OR pulley and some longer gears , these ones are too short it goes 100km/h in like 4-5sec. For the carb i need to wait like 1 mounth for needles and jets so i might get 28 or 30mm carb and S6 Racing kit for next season i will see.
|
|
|
Post by Delpzie on Oct 15, 2017 17:28:46 GMT -5
|
|
|
Post by Delpzie on Oct 17, 2017 11:54:09 GMT -5
Today i was driving and recording with the phone and i heard that rpm dropped just wasnt paying attention to the rpm meter , then home i re-watched the video and from 13 400/800 jumps down to 12 500, these days i will get jets and try diffrent rollers etc... really dont know on what rpm to try setting up this cylinder will try 13,500 will see. www.youtube.com/watch?v=zHX6XjUnsG4
|
|
|
Post by Delpzie on Oct 24, 2017 20:54:42 GMT -5
|
|
|
Baotian
Oct 24, 2017 21:09:43 GMT -5
Post by spaz12 on Oct 24, 2017 21:09:43 GMT -5
A few people here (or at least one here) had issues with the mkII rings spinning on the piston and then catching a port. The little centering pin that keeps the rings clocked was pushed into the piston allowing a ring to spin. Just letting you know.
|
|
|
Post by Delpzie on Oct 25, 2017 2:39:00 GMT -5
Hmm intereseting never heard anyone else complain about that stuff, will see i might even get mhr team but that way i will need new crank which probably will be MHR RHQ with 12mm piston pin.
|
|