Minarelli v belt size

[neogie]

Hi guys. Just needing some help with my minarelli 1e40qmb scooter belt size. It’s set up with a stage6 variator, 4.5g rollers, has a jog90 size rear pulley. My current belt size is 797x16.6x30. The belt rides nice on the rear pullley giving me good acceleration. However, i seem to notice like with the good old sharpee trick at the front pulley, the belt doesn’t reach the top of the variator leaving like a 5-10mm mark. The belt looks a bit short as well. I can’t seem to find any longer size belt with the current one I’m using. Any idea if there is a belt that is tad longer than what I’m using?thanks

[Zino]

Parts for scooters has plenty of up sized belts 
You basically turned you turned your cvt into a overange So the malossi overrange is probably the upper end and The polini 805 Belt is the lower end .

www.partsforscooters.com/All-Scooter-Parts/All-Parts-Drive-and-Transmission/scooter-parts-belts?display=grid&page=4

Measure how much travel you have on the back pulley to the edge with a sharpie. 
Using this math equation to dial it closer .
3.14 x mm of travel left addded to current belt diameter.

More than 3mm Go Malossi less than 3mm go Polini .