11pole stator for 50cc 4t

[tvnacman]

Hey guys I have it figured out 11pole 3 phase stator on a 50cc 4t . I have a little twist you can do 6 or 7 pin regulator . It you need to auto energize something like head lights when the engine is running go with the 7pin . If your running fuel injection use the 6pin or take the 7pin and don't use the white wire .

John

[90GTVert]

Interested. I don't really need the power ATM, but I'm always interested in scooter mods.

[tvnacman]

stable headlights a fully charged battery all the time .

John

[flashback30]

sounds nice i am interested in this mod

[tvnacman]

bump

[craisin]

I am curious

[tvnacman]

I have all the parts ready to ship. If you have questions call me I can walk you throught it.

I expected this to get more interest .

John

[robroy82]

How much for everything?

[90GTVert]

More details may lead to more interest. Cost ballpark, how tough is the conversion, etc... Just a thought.

[tvnacman]

the conversion is simple 3 yellows from the new stator connect to the new regulator green to green then to the negative battery , black and red from the regulator to the black and red to the ignition switch , white to the enrichener . The trickiest part is the headlight , connect the yellow lighting wire to 12vdc it can be connected to the key switch or a relay . I would go with a relay not to tax the key switch .

As far as cost I try to keep that to PM's but since you asked . If you have a 6pole stator you will need a magneto/flywheel about $100 for stator magneto and regulator . If you have 8pole stator about $75 .

www.testedscooterparts.com/product_info.php?cPath=462&products_id=21475784

Guys I will stay with you before during and after this project .

John

[90GTVert]

Thanks for the info. Doesn't sound too bad for anyone that can do a little wiring work with instruction. So the 8 pole flywheel will fit the 11 pole stator? Interesting. It's something I'll keep in mind for the future.

[craisin]

thanks for the info i am a kiwi from New Zealand and i can buy local cheaper without thinking about shipping

i can also buy the items local and pay more than you quote with no support at all

[tvnacman]

Dec 30, 2013 13:33:07 GMT -5 craisin said:

thanks for the info i am a kiwi from New Zealand and i can buy local cheaper without thinking about shipping

i can also buy the items local and pay more than you quote with no support at all

I'm not sure of how much room there is in price , if you send me your address I could get you a quote for shipping .

if you have questions ask .

John

[Deleted]

John,

What is the power output per phase and combined? either in watts or amps? Is the V per phase in spec for the manufacturer specs of 43 to 54 Vac per phase? if not what is the Vac per phase?

Is this the highest power output that will fit a gy6 50cc? or is there anything more powerful that can be installed?

[tvnacman]

Dec 16, 2014 17:11:15 GMT -5 bull said:

John,

What is the power output per phase and combined? either in watts or amps? Is the V per phase in spec for the manufacturer specs of 43 to 54 Vac per phase? if not what is the Vac per phase?

Is this the highest power output that will fit a gy6 50cc? or is there anything more powerful that can be installed?

Bull , as with most Chinese parts there are no manufacturer spec's . I based my testing on DC output and I was able to hold a 125 Watt load and the charging voltage was 13.3vdc . If your asking about acv in an effort to power some lights it will not work . The 3 phase system the regulator will load down the acv to regulate the dc output . Its not uncommon to get a voltage reading of 7 or 8 vac on the stator output wires when running and connected to the regulator . I'm not aware of other setups besides 6 or 8 pole setups . I have seen some floating ground mods with some other type regulator . I have not worked on or done any testing with the floating ground mod .

This can be used for DC ignition and AC ignition or convert vise versa .

John