|
|
Post by 70ccsuperyates on Aug 22, 2013 23:40:54 GMT -5
What would you guys say is the best way to vent your trans case drill holes, use a jigsaw, cutting wheel, torch I'm thinking of ways to vent my trans case without buying a case boring tool I have everything above plus a ton of files and sandpapers if you have any ideas or thoughts or would use another tool plz lemme know below v
|
|
|
|
Post by ryan on Aug 22, 2013 23:50:45 GMT -5
case boring tool is for the bore of the engine it removes the material to accept bigger cylinders not boring holes in your cvt cover.
some people drill holes above the rear pulley and front of the variator to allow airflow. but think of where rain and mud can get in and stay away from those areas.
|
|
|
|
Post by ryan on Aug 23, 2013 0:00:04 GMT -5
or if you can work it in, drill a hole in the fan cover about 1in and connect a hose from it to the cvt and youll have a forced air cooled cvt
|
|
|
|
Post by 70ccsuperyates on Aug 23, 2013 0:03:35 GMT -5
or if you can work it in, drill a hole in the fan cover about 1in and connect a hose from it to the cvt and youll have a forced air cooled cvt I'd have to hit up the hardware store for that I've no inch diameter hoses just laying around |
|
|
|
Post by ryan on Aug 23, 2013 0:04:03 GMT -5
try radiator hose
|
|
|
|
Post by 90GTVert on Aug 23, 2013 10:42:01 GMT -5
I use a drill and a carbide burr then file to finish whatever shape and sandpaper to smooth the edges.
|
|
|
|
Post by dennis5150 on Aug 23, 2013 15:06:37 GMT -5
I am thinking about this myself, once the CVT gets hot it kills the take off. I'm thinking about opening up both ends so air will pass straight through the cover, maybe some kind of scoop on the front and some screen wire to keep debris out.
|
|
|
|
Post by kevin55950 on Aug 23, 2013 20:22:50 GMT -5
I cut between reinforcements on my Zuma cover... looks pretty good ! I haven't put many times to make perfect lines, but well... unless you know it, you won't notice it  |
|
|
|
Post by 70ccsuperyates on Aug 23, 2013 20:46:24 GMT -5
I cut between reinforcements on my Zuma cover... looks pretty good ! I haven't put many times to make perfect lines, but well... unless you know it, you won't notice it Kevin you got any pics of it is love to see if so! |
|
|
|
Post by kevin55950 on Aug 23, 2013 20:47:35 GMT -5
|
|
|
|
Post by 70ccsuperyates on Aug 23, 2013 20:51:37 GMT -5
dude that fcking looks sick as hell bro I like it but how about debris no kinda screening mesh to help protect from the elements or has it been fine is it on now and is love to see it on the scoot! |
|
|
|
Post by 70ccsuperyates on Aug 23, 2013 20:53:20 GMT -5
also what all tools were required in ur nodding of trans case ? |
|
|
|
Post by kevin55950 on Aug 23, 2013 20:59:32 GMT -5
Fine without, but when this cover was on the Zuma I used some door mesh grille to cover the holes because kids at school liked to put crap everywhere they could on the scooters. I drilled holes on the corners and used a dremel buffer to make the lines.
|
|
|
|
Post by craisin on Apr 12, 2014 20:44:46 GMT -5
  witwith a cutting disk and grinder |
|
|
|
Post by dan50 on Apr 13, 2014 0:21:20 GMT -5
|
|
