|
|
Post by viper0463 on Apr 13, 2014 6:51:40 GMT -5
Ok so I'm on my way home from work and my front inside brake pad went by by. Eton beamer II. I was real hard on the brakes at the time (a whole herd of dear ran out). Anyways I now have to get new pads but that's not my problem. My problem is I now have a few very nasty and deep gouges on that side of the rotor. Where can I get a good rotor? Or what other scoots rotors will work, zuma maybe? I found a oem rotor but $118 is insane and I can't afford that. Thank all
|
|
|
|
Post by usmcdoc on Apr 13, 2014 7:26:16 GMT -5
Ok so I'm on my way home from work and my front inside brake pad went by by. Eton beamer II. I was real hard on the brakes at the time (a whole herd of dear ran out). Anyways I now have to get new pads but that's not my problem. My problem is I now have a few very nasty and deep gouges on that side of the rotor. Where can I get a good rotor? Or what other scoots rotors will work, zuma maybe? I found a oem rotor but $118 is insane and I can't afford that. Thank all Post a pic of the rotor. Measure the OD and the ID(hole in the middle) See if it is 3 bolt or 4 bolt and measure the bolt spacing. You don't need OEM and they are gonna cost ya 3-4 times what you can get one for. So get that information above..put it out here..and soon you will be laden with links to what you seek. Folks here know their Scoots and parts well!! That is why this is my #1 favorite Scoot site. Folks willing to help..vice bicker and insult as they do on other forums. 90GTVert runs a very people oriented and helpful site loaded with Tech articles..Vids and 'How to' tutorials. I you can't find answers and solutions here..they don't exist..  |
|
|
|
Post by 90GTVert on Apr 13, 2014 8:50:10 GMT -5
I usually just search something like "scooter brake disc" or "scooter brake rotor" on eBay. Some listings have measurements so I match those up to what I have. I've never paid anywhere near $100 for a rotor. Example |
|
|
|
Post by viper0463 on Apr 13, 2014 19:02:45 GMT -5
I'll take the rotor off tomorrow and see what the size is. I'll let everyone know.
|
|
|
|
Post by shakerdriver on Apr 18, 2014 7:50:36 GMT -5
I've got one if your interested viper, pm me.
|
|
