|
Post by renagade281 on Jun 30, 2015 23:45:58 GMT -5
Yea it doesn't do anything if I tighten it All the way
|
|
|
Post by renagade281 on Jun 30, 2015 18:01:41 GMT -5
|
|
|
Post by renagade281 on Jun 30, 2015 12:37:07 GMT -5
It seems as if my mixture screw on the side of the carb isn't doing anything no matter how many times or which way I turn it. Scooter is running fine at high speed but idle and low speed is kinda sluggish. I tried following the PDI video but the mixture screw isn't effecting how it idles
|
|
|
Post by renagade281 on Jun 29, 2015 21:24:14 GMT -5
How much should I charge for something like this on eBay?
|
|
|
Post by renagade281 on Jun 29, 2015 14:28:13 GMT -5
Yes it is running good now. It idles up and down.. Never did that before but as long as it runs I'm OK. Gonna buy another scooter next month and sell this one
|
|
|
Post by renagade281 on Jun 29, 2015 13:06:49 GMT -5
Holy sh%& I just checked the valves and the one on the bottom with the e next to it was all the way loose. I could stick my whole pinkie in where the .004 feeler gauge should barely fit. I guess I didn't tighten it all the way yesterday. Or maybe going down a hill too fast caused it?
|
|
|
Post by renagade281 on Jun 29, 2015 12:23:37 GMT -5
Replaced sparkplug with ngk c7hsa and it started but this is at full throttle... youtu.be/7PEhqKgxpsk
|
|
|
Post by renagade281 on Jun 29, 2015 11:25:21 GMT -5
Just pulled the spark plug off and the tip was all burned and black and it definitely was not like that yesterday
|
|
|
Post by renagade281 on Jun 29, 2015 11:05:00 GMT -5
Compression is 153 so that's good
|
|
|
Post by renagade281 on Jun 29, 2015 10:40:35 GMT -5
Where is the carb fill line
|
|
|
Post by renagade281 on Jun 29, 2015 8:41:17 GMT -5
OK I changed it to public
|
|
|
Post by renagade281 on Jun 29, 2015 8:19:57 GMT -5
|
|
|
Post by renagade281 on Jun 29, 2015 7:50:55 GMT -5
|
|
|
Post by renagade281 on Jun 29, 2015 7:02:18 GMT -5
So I fixed my issue from yesterday but as I'm on my way to work this morning I was cruising down a hill at about 40mph and the scoot just died. I would give it throttle and nothing. Now it won't start and I'm stranded.. Grrrrr
|
|
|
Post by renagade281 on Jun 29, 2015 0:09:03 GMT -5
I see some exhauSts that look like a trombone sort of. Lol that's the only way I can describe it. Like the exhaustexhaust pipe loops back around
|
|