|
Post by thegammaghost on Nov 12, 2017 0:41:01 GMT -5
back to the main point of this thread, anyone have any ideas, or sources of how i can find the rear plastics that sit under the seat?
|
|
|
Post by thegammaghost on Nov 11, 2017 23:27:35 GMT -5
also, oil change, anyone have an idea of capacity, and oil type? i cannot find ANYTHING, on this scooter.
|
|
|
Post by thegammaghost on Nov 11, 2017 20:59:17 GMT -5
youtu.be/NLzJc4x-XJ8so i rode it a bit today, things awesome. it seems to accelerate pretty hard on idle, like the wheel is always turning. to cold to mess with it right now, but im sure just turning the idle down would help this problem. when i ride it, and go like 20-25mph and then let off gas, it seems to want to accelerate even more, than when i was accelerating. Am i wrong, thinking that turning the idle down a bit will fix this problem? ***edit*** adjusted idle, runs awesome now.
|
|
|
Post by thegammaghost on Nov 9, 2017 22:35:36 GMT -5
hell yeah. where would you recommend i start on getting more out of this little scooter. i plan to clean the carb for sure. but what else can i do?
|
|
|
Post by thegammaghost on Nov 9, 2017 22:08:06 GMT -5
not sure about the cvt, haven't ridden it much at all. what do you mean by sleeper, like throw a bigger engine in it?
yeah i'm buying to many bikes, i have 3 motorcycles, and 2 mopeds now. the honda nh125 is to much of a headache for me at the moment, so its the one i'm willing to part with.
|
|
|
Post by thegammaghost on Nov 9, 2017 21:17:22 GMT -5
only pic i got of it so far, been busy sense i got it. it is a Veryy small scooter, that's probably my favorite thing about it. i am able to lift it completely off the ground above my knees its so light. with snow coming soon and not having a garage, i'm not sure how much i'm going to toy with it. but for 50 bucks i figured F it. wish i could find the plastics for the back to make it complete. ill try and post more/better pics once i have a day off. RollingThunder! central WI? that picture i posted wasnt of the actual scooter i got, but heres ones.
|
|
|
Post by thegammaghost on Nov 9, 2017 12:35:27 GMT -5
also the front and rear fender are missing if anyone can help with those too, thanks!
|
|
|
Post by thegammaghost on Nov 9, 2017 12:32:52 GMT -5
Picked up one of these bad boys with only 4500 miles on it, for $50 bucks. was a no brainer. trying to find a the rear plastics for it though, the parts that lay horizontal just under/behind the seat. ive tried finding them with no luck, anyone have any ideas?
|
|
|
Post by thegammaghost on Jul 18, 2017 19:22:34 GMT -5
lol okay fugaziiv, apparently my girlfriend flooded it to all hell. Left the plug out and wire out for a couple days. went to her house, and it started RIGHT up. ahhg. figured i would try to get to the bottom of it before i went over there today. but apparently it was an easier solution than i thought. thanks for all the help fugaziiv, if it doesn't start for real at some point, i will refer to this.
|
|
|
Post by thegammaghost on Jul 18, 2017 16:46:58 GMT -5
|
|
|
Post by thegammaghost on Jul 18, 2017 16:35:21 GMT -5
haha, okay i will take a compression tester to it once im off work.
|
|
|
Post by thegammaghost on Jul 18, 2017 14:49:17 GMT -5
should i add another gallon of gas?
well i did a compression check a while ago and it was good. but while it was at my girlfriends, i put my thumb over the spark plug hole and it blew it right off easily.
|
|
|
Post by thegammaghost on Jul 18, 2017 14:34:02 GMT -5
thanks matt!
yes compression is good. i did see oil leaking oil mix pump, so i added a half pint to a gallon of gas just so i knew its getting oil. were trailering it back to my apartment today so ill have more lighting and tools to try and fix it.
i'm hoping it was just super flooded from trying to start it so much, i've left the spark plug out and open for like 2 days now, so it'll definitely be dry, but that probably just a shot in the dark.
|
|
|
Post by thegammaghost on Jul 18, 2017 13:57:28 GMT -5
Let my girlfriend ride it home the other night. she went to start it the next morning, and nothing. tried everything to get it to even slightly start. even in desperation tried a bit of starter fluid, still nothing, i have spark. gas appears to be entering the carb. could it be a dirty carb issue?
Im wondering if i need to adjust the valves. if so. i have no idea how to do it on this engine, if anyone who has done it before on this scooter could give me a step by step on how to do it, and how much, i would be supppper greatfull.
any help/ideas are appreciated, thanks!
|
|
|
Post by thegammaghost on May 8, 2017 20:13:53 GMT -5
I believe they're called Pollymold
|
|