|
|
Post by iwannascoot on Apr 9, 2015 12:39:59 GMT -5
...and yours doesn't run.  Billy |
|
|
|
Post by thatcrazyguy on Apr 9, 2015 14:12:58 GMT -5
Did you put that ring on? If yes, where?
|
|
|
|
Post by 90GTVert on Apr 9, 2015 14:29:03 GMT -5
|
|
|
|
Post by thatcrazyguy on Apr 9, 2015 15:26:30 GMT -5
Great info Brent, helps alot of us installed new pistons. Thanks! |
|
|
|
Post by iwannascoot on Apr 9, 2015 16:32:10 GMT -5
So is 1mm squish going to be good with this 2t?
Billy
|
|
|
|
Post by 90GTVert on Apr 9, 2015 20:22:15 GMT -5
That will work. You could go less if you wanted to and compression allows.
|
|
|
|
Post by iwannascoot on Apr 9, 2015 20:25:10 GMT -5
That is where it ended up when I installed to BBK with the supplied gaskets.
I think I'll leave it and see how it runs.
Billy
|
|
|
|
Post by iwannascoot on Apr 10, 2015 15:09:36 GMT -5
Woohoo  my Baccio is back on the wheels!!!  Billy |
|
|
|
Post by thatcrazyguy on Apr 10, 2015 15:41:40 GMT -5
Woohoo my Baccio is back on the wheels!!! Billy Did it fire up? How'd the rev sound? Get that son of a bitch back together and take a video of the first ride the the upgrade for us!#! |
|
|
|
Post by iwannascoot on Apr 10, 2015 18:58:50 GMT -5
Well you made me do it. I put it back together enough to take it for a ride. First impression: not much from a stop but seems to get better when the revs come up. I only rode it for about 60 seconds because I didn't have my helmet on and that's illegal here. I took a very poor cell phone video but can't get it posted. This scoot needs some tuning and a BUNCH of riding to get it going right Billy |
|
|
|
Post by thatcrazyguy on Apr 10, 2015 20:56:08 GMT -5
Well you made me do it. I put it back together enough to take it for a ride. First impression: not much from a stop but seems to get better when the revs come up. I only rode it for about 60 seconds because I didn't have my helmet on and that's illegal here. I took a very poor cell phone video but can't get it posted. This scoot needs some tuning and a BUNCH of riding to get it going right Billy Did you tune the cvt at all? |
|
|
|
Post by iwannascoot on Apr 10, 2015 21:35:10 GMT -5
No cvt tuning today. I just got it back together enough to go for a short drive. The cvt cover wasn't even on there at the time. I need to adjust the carb and tune the cvt before I ride it very much. I think it's going to be a fun ride when it's all tuned.
Billy
|
|
|
|
Post by thatcrazyguy on Apr 11, 2015 7:22:05 GMT -5
No cvt tuning today. I just got it back together enough to go for a short drive. The cvt cover wasn't even on there at the time. I need to adjust the carb and tune the cvt before I ride it very much. I think it's going to be a fun ride when it's all tuned. Billy I bet it will be!!! |
|
|
|
Post by iwannascoot on Apr 11, 2015 7:23:43 GMT -5
Now get yours running.
|
|
|
|
Post by thatcrazyguy on Apr 11, 2015 8:15:12 GMT -5
Got a stator, and the flywheel pulley will be delivered today with 6g sliders. |
|
my Baccio is back on the wheels!!!