|
Post by slider4ride on Apr 6, 2015 14:31:28 GMT -5
Hey guys, i want to swap my yamaha slider front plastic to yamaha booster front plastic, is it posible? some of my freinds said that will take a lot of work but thats possible. I dont wanna answers like buy a booster or smth like that cuz booster sucks , only front is cool:) Say what you think
|
|
|
Post by slider4ride on Apr 6, 2015 16:24:12 GMT -5
cmon guys answer:((
|
|
|
Post by iwannascoot on Apr 6, 2015 16:35:57 GMT -5
I'm not sure where you are but lots of guys are at work now and might answer when they get home. Welcome to the forum Billy
|
|
|
Post by niz76 on Apr 6, 2015 17:09:00 GMT -5
Unfortunately we don't have the Yamaha Slider here in the U.S. so not too many people here will any experience with one.. The MBK booster is referred to a Zuma here in the U.S... I highly doubt the body pieces will simply slap on easy cheesy and all screw holes will match up. That being said, anything is possible with a welder and bondo!
|
|
|
Post by Sitticuss on Apr 6, 2015 17:15:34 GMT -5
Don't forget the duck tape.....
|
|
|
Post by slider4ride on Apr 6, 2015 17:36:56 GMT -5
yeah im using in my langue ,stiklo pluostas. that means glass fiber:)
|
|
|
Post by 90GTVert on Apr 6, 2015 21:03:15 GMT -5
If you're willing to put in the effort of body work and possibly welding new mounting points to the frame I'm sure it can be done. I'd think you must really want the styling to go through that kind of effort. If you do decide to take on the project, please share some details with us.
|
|
|
Post by moofus02 on Apr 7, 2015 6:12:50 GMT -5
I take it the red bike is the booster and white is slider? Booster a vertical motor? How about the slider? Wish we could get the cool stuff here. I would get the two side by side and do some measuring. If it looks close you should be able to do it with mounting fab work and some body work. Probably not real easy but cool. Keep us posted on what you find out
Sent from my SPH-L720 using proboards
|
|
|
Post by slider4ride on Apr 7, 2015 7:18:48 GMT -5
Sup, i already bought a mbk booster front plastic ,and thinking, i got 2 ideas 1 leave slider crash-bars (it's alto easier) 2 or take of sliders ant work with welding, and it's will look a lot better what do you think guys? 9sorry for my english) i will post some pitures in future:)
|
|
|
Post by slider4ride on Apr 7, 2015 7:20:04 GMT -5
I take it the red bike is the booster and white is slider? Booster a vertical motor? How about the slider? Wish we could get the cool stuff here. I would get the two side by side and do some measuring. If it looks close you should be able to do it with mounting fab work and some body work. Probably not real easy but cool. Keep us posted on what you find out Sent from my SPH-L720 using proboards yeah buddy your right red is booster and white is slider, these sooter are same just with other plastic kits, both have minarelli vertial motors
|
|
|
Post by Lucass2T on Apr 7, 2015 9:18:10 GMT -5
You should try dutch fora. Been done thousands of times i know. At least 90% of dutch ppl speak english so i would give it a try at the following fora:
scooter-freaks.nl scooterforum.net
|
|
|
Post by Sitticuss on Apr 7, 2015 10:40:43 GMT -5
You should try dutch fora. Been done thousands of times i know. At least 90% of dutch ppl speak english so i would give it a try at the following fora: scooter-freaks.nl scooterforum.net I knew that woman spoke english. I even had my good t-shirt on that day.
|
|
|
Post by 808ministroke on Jul 20, 2021 1:21:15 GMT -5
Don't know how you are doing with this but I'm taking it maybe even a step further I ordered a full set of booster plastics and and I'm going to try mounting them on top of a Yamaha jog clone. we will see....
|
|
|
Post by yambw’s on Jul 20, 2021 2:18:06 GMT -5
Sounds cool!
|
|