|
|
Post by Thebatman on Jan 9, 2011 9:43:29 GMT -5
Hey guys, i was looking in the review thread and didnt see one for this place. I didnt put in there since i havent ordered from them.....yet.. :lol:
They have yasuni and laser x exhaust pipes. (those were suggested over a technigas or lv, at what appears to be a SWEET price.)
They also have a killer sale on a crank shaft for several of your engines. (ie. seen it fits cpi, keeway,etc.)
I didnt see any shipping cost as its "on the other side of the water". Heard tell that shipping that distance can easily get expensive... But they sure do have some NICE prices on things.. The price crunch section has several specials going on..
One reason for this is i will need a different pipe soon and i'd like to try another, instaed of another lv zx going on the zx.. Heard the laser or yasuni are recomended over the lv zx.. This site has a laser and yasuni CHEAPER than a lv or a rs2. (but the s
+h may not be worth it.).. Thanks guys for any input, if any available on this site. :lol:
|
|
|
|
Post by Thebatman on Jan 9, 2011 9:45:14 GMT -5
|
|
|
|
Post by lshigham on Jan 9, 2011 9:59:05 GMT -5
Yes, I am familiar with them. In fact, I was talking about that very crankshaft yesterday. They are good at sending out the parts you order promptly, but don't bother with technical support. Some of the no-name stuff is of very questionable quality, the crankshaft you've linked to is suitable for nothing other than a standard cylinder. Watch out for the Doppler cylinder's too. The branded stuff (Polini, Malossi etc.) is fine. What cylinder is the pipe for? I've had a lot of experience of the Yasuni's. |
|
|
|
Post by lshigham on Jan 9, 2011 10:00:01 GMT -5
Oh, and that crank is only suitable for the Piaggio engines found in Aprilia, Derbi, Gilera and NRG scoots.
|
|
|
|
Post by Thebatman on Jan 9, 2011 10:08:12 GMT -5
Thanks for the info... Wasnt expecting such a quick response.. :lol:
The kit i will use is a malossi 70cc l.c cast iron. Its going on a kymco l.c super9. (supoosedly the airsal cyl is shot thats on it).
Figured i'd try and check $ on one of those yasuni or laser x and was about blown away at the price. compared to when i was looking for the zx.. big difference in price now for this other engine.. seen the yasuni for i think it was $155.. wow. seeen at some web site back then and these pipes were around $300... Of course they are out of stock on the chrome one right now..(yasuni z)
|
|
|
|
Post by lshigham on Jan 9, 2011 10:38:47 GMT -5
Thanks for the info... Wasnt expecting such a quick response..  The kit i will use is a malossi 70cc l.c cast iron. Its going on a kymco l.c super9. (supoosedly the airsal cyl is shot thats on it). Figured i'd try and check $ on one of those yasuni or laser x and was about blown away at the price. compared to when i was looking for the zx.. big difference in price now for this other engine.. seen the yasuni for i think it was $155.. wow. seeen at some web site back then and these pipes were around $300... Of course they are out of stock on the chrome one right now..(yasuni z) A Yasuni Z is perfect for that setup. |
|
|
|
Post by Thebatman on Jan 9, 2011 11:13:10 GMT -5
I bet that's one of those that you cant get the shipping till at checkout.. they are out of stock on the chrome, I wonder what the re up time is there..(of course i'd rather have the chrome one) They have a phone number thats wild.. :rofl: I have NO experiance with any international calls.
I had seen the yasuni and a laser x pro is suppose to work the best with that set up... seen a set up profiles thread on another forum..
|
|
|
|
Post by Thebatman on Jan 9, 2011 11:50:15 GMT -5
:doh: :doh:
The laser x was the chrome which is out of stock
I'm thinking yasuni didnt make a chrome.. maybe i can get the yasuni instead of the rs2 or lv zx-r i have been looking at if i can fiogure out the shipping from the store.. :lol:
|
|
|
|
Post by lshigham on Jan 9, 2011 11:55:47 GMT -5
You can get delivery charges by clicking change currency under checkout on the left, then view order. To call them from abroad you want +441226 630 020
|
|
|
|
Post by Thebatman on Jan 9, 2011 12:32:13 GMT -5
thanks for that.. I will go back and check shipping
|
|
|
|
Post by Thebatman on Jan 9, 2011 12:35:41 GMT -5
|
|
|
|
Post by 90GTVert on Jan 9, 2011 13:30:02 GMT -5
www.sipscootershop.com is the best place I've dealt with for reasonable prices and times on overseas shipping. Might wanna see what that comes to. I think it's gonna be fairly expensive anywhere for a pipe though because the box is so big.
|
|
|
|
Post by superk on Jan 9, 2011 16:01:09 GMT -5
I agree with 90GTVert. There are some other good tuning-stores here in Germany like Racing Plant (60€ to US) or Scooter-Attack (i think they do not ship to USA), but I think SIP is the best way to get the parts for a fair price.
|
|
|
|
Post by 90GTVert on Jan 9, 2011 16:06:46 GMT -5
|
|
|
|
Post by lshigham on Jan 9, 2011 17:58:32 GMT -5
I know Scooter Center (yes, they do spell it properly  ) ship to the states, and reasonably too. |
|
) ship to the states, and reasonably too.