|
|
Post by alfred on Aug 15, 2015 13:46:29 GMT -5
Hello from blacksburg va. My name is alfred and i was wondering if anyone might know how to solve this problem. My two stroke will run at idle but dies when gave more throttle. Have good spark and good feul flow. Compresion is at 100 psi but still wont run when gave throttle. Tried different settings on carb nothing seems to work. Any suggestions on what would fix this problem. Any help is appreciated greatly. Thank you all.
|
|
|
|
Post by 90GTVert on Aug 15, 2015 14:55:17 GMT -5
 100psi is not very good. About the minimum for it to run so that should be investigated. Also make sure the throttle is wide open when doing a compression test and use the kicker at least to finish because the e-starter often won't let it reach the highest reading. Testers often have trouble sealing to the cylinder as well. It's common for some reason for people to remove the air box. If your airbox is not installed, put it on and then see how it runs. |
|
|
|
Post by derbiman on Aug 15, 2015 15:29:23 GMT -5
Maybe the main jet is clogged. If the scooter has been sitting for a while,you should do a complete carb cleaning. It would be a good idea to clean the tank also.
|
|
