|
|
Post by tiny on Apr 20, 2016 16:28:38 GMT -5
|
|
|
|
Post by gsx600racer on Apr 20, 2016 17:01:12 GMT -5
Tiny, I think you might have the earlier version of the ZX50 or what they called the Super Fever I. I believe the your model is the "KCA SA10AL". Check the #'s on the engine case located in the pic shown.  Your pics look a lot like how the Honda Elites are wired/built. I know my 2001(Honda)is just like the pics you posted. If I was to guess, (A)a Honda CDI would work on yours, (B)I don't think your CDI is restricted. I know the CDI on my 2001 Honda is not restricted. Again, I could be wrong. Just taking a guess from the similarities from your Kymco to Honda Elites Iv worked on. Just an FYI on the parts lookup for both models. Kymco Fever 1 CDI
Kymco Fever 2 CDI |
|
|
|
Post by gsx600racer on Apr 20, 2016 17:07:40 GMT -5
Sorry having issues getting pictures to show. Wife Just HAD to upload Windows 10. Its a flipping pain in the arse can't get anything done because its all changed for the better you know  Would that be the CDI? Its located right where it says it is in the service manual above battery on the right hand side looking forward. It has 5 wires heading into it with only 1 being green(the 1 in the picture). Quit different from the Picture you posted GSX600racer The picture he posted is accurate, pull the seat bucket and it is on the right in either a rubber mount, tiewraps, or just dangling! LoL Possibly you have a ZX1 instead of a ZX2 or something? What year do you have? Possibly they are different from year to year. Oldgeek, I think your correct with the ZX1 & ZX2 flavors. (Super Fever I 50 ZX50 & Super Fever II 50 ZX50 models) |
|
|
|
Post by oldgeek on Apr 20, 2016 17:12:03 GMT -5
The picture he posted is accurate, pull the seat bucket and it is on the right in either a rubber mount, tiewraps, or just dangling! LoL Possibly you have a ZX1 instead of a ZX2 or something? What year do you have? Possibly they are different from year to year. Oldgeek, I think your correct with the ZX1 & ZX2 flavors. (Super Fever I 50 ZX50 & Super Fever II 50 ZX50 models) I have never seen one in person, but It looks like the earlier version from the pictures. Might be a good thing for him, i think the ZX1 are a closer copy of the af16, at least as far as the transmission goes. I recently noticed RP is no longer listing OEM parts for the zx.  |
|
|
|
Post by gsx600racer on Apr 20, 2016 17:17:33 GMT -5
Oldgeek, I think your correct with the ZX1 & ZX2 flavors. (Super Fever I 50 ZX50 & Super Fever II 50 ZX50 models) I have never seen one in person, but It looks like the earlier version from the pictures. Might be a good thing for him, i think the ZX1 are a closer copy of the af16, at least as far as the transmission goes. I recently noticed RP is no longer listing OEM parts for the zx. I think they are updating the site. Iv seen this happen before. Give it a month, if you notice a lot of their parts have also disappeared too. |
|
|
|
Post by tiny on Apr 20, 2016 17:18:22 GMT -5
Numbers on the Engine case KY-SC10 *8500123*(above/below).
ZX50 Super Fever are on the sides.
Model year 2005.
Built March of 2005
|
|
|
|
Post by gsx600racer on Apr 21, 2016 18:04:53 GMT -5
I am sorta at a loss. Your engine #'s show its a Super Fever II 50 ZX50 model, but your guts(parts) make it look like a Super Fever I 50 ZX50 version. Maybe you got one of the last few built and they used what they had left to assemble. Did you get your carb issues sorted out ?  |
|
Would that be the CDI?
