|
|
Post by drawkward on May 8, 2011 20:06:52 GMT -5
I think I'll get this one. Got a HF less than 10 minutes from here. It's got good ratings. I saw it earlier today, actually. I went up there to pick up some hones, and didn't even think about the water screwing with the soda I was about to be blasting. |
|
|
|
Post by jmkjr72 on May 8, 2011 20:14:46 GMT -5
yeah that looks like one of the inline ones i used to have for a paint gun
|
|
|
|
Post by drawkward on May 8, 2011 20:19:40 GMT -5
And you were pleased? I want to figure out a better hopper solution too. Something like a paint ball gun, so I don't have to deal with the hose. Or, just a better fitting for the hose to the gun - ie a Y fitting, instead of the usual T (I tried a T today, pressure going both ways. I knew it wouldn't work, but I still had to try it). I feel like that would help with the soda getting passed the tip of the air gun's nozzle - increasing efficiency in the process.
|
|
|
|
Post by jmkjr72 on May 8, 2011 20:51:34 GMT -5
yeah it worked nice i only used it on the end of paint guns
i tired it on some other stuff but because it has to be straight up and down to work it doesnt work too good on tools
|
|
|
|
Post by 2strokd on May 9, 2011 2:39:02 GMT -5
Thanks Fox but i cant take credit for cleaning the engine. 190mech did that part ;D. Cool drawkward  . I bet your right. Get a bigger compressor and some dry air and i bet your in there :thumb: |
|
. I bet your right. Get a bigger compressor and some dry air and i bet your in there :thumb: