|
|
Post by tsimi on Apr 24, 2017 4:49:03 GMT -5
UPDATEMy current setup per 2020/7/15 70cc TPR Black Trophy Stage6 19mm PHBG carb (37/85, W7 needle, clip 2nd from top, 40 slide, mixture screw 2 turns out) Stock airbox snorkel removed with Malossi sponge inside Tecnigas Next-R exhaust stock variator with 3x3.5g+3x5g roller weights Polini Evo 2G 105mm clutch, blue springs (20.5mm) with stock clutch bell Malossi yellow torque spring Yamaha Stock Belt Time has come to join the vertical world! Tomorrow I am gonna go pick up my Prebug. It is a very old and beat scooter. Now there are some issues that I need to clear quick so that I can ride it asap. With quick I mean yesterday.  I count on your guys help here because I have no clue regarding those prebugs. Thanks in advance for your help. Oh and before I forget here the pics...   
|
|
|
|
Post by spaz12 on Apr 24, 2017 5:09:59 GMT -5
Finally, you got it! I would pull the plastics off and look where the lock cylinder/plug goes into the steering stem to stop it's movement. Make sure that it hasn't been damaged. I only have one working headlight on my bws, so don't know how they are supposed to light up. Get LED's for the turn signals, which draw hardly any power. I have an extra LED flasher relay and will send it. No idea about Kenda tires or the center stand. Get a side stand, YO  |
|
|
|
Post by tsimi on Apr 24, 2017 6:34:37 GMT -5
|
|
|
|
Post by moofus02 on Apr 24, 2017 6:51:04 GMT -5
I'm running Kenda k413's on my c3 and love them
|
|
|
|
Post by benji on Apr 24, 2017 7:49:06 GMT -5
(5)That doesn't look like the speedo cable mine uses. Mines black rubber that sticks intent he brake hub and has a little metal clip to hold it in.
Sorry, these aren't in order.
(3)It is normal for one headlight to work, 2 on hi beam. You can rewire them to come on both at the same time, but I just hook em both up to hi beam, off on lo beam.
(4) mine won't flash unless I got a fresh battery or I rev it up. Go thru the harness and check grounds tho; if you cut off the tape and trace back from the battery you can find lots of factory splices that go bad for the ground wires.
(1) I don't know. I use a bicycle kickstand from wal-mart. Do you guys have wal-mart?
(2) lock kits are pretty common and cheap, for any scooter it seems. Racing planet should have a complete set.
(6) I swapped out my knobby tires for street tires for performance on the road.
|
|
|
|
Post by benji on Apr 24, 2017 7:51:29 GMT -5
My universal kickstand. Made by bell.  |
|
|
|
Post by tsimi on Apr 24, 2017 7:57:02 GMT -5
Thanks benjiYeah i have seen your side stand, cool thing and reasonable. And no we don't have Walmart here. But I should be able to find a generic side stand. I found a center stand though and will go for it for now. Anyone knows where to find a speedo cable for a prebug? |
|
|
|
Post by benji on Apr 24, 2017 9:25:40 GMT -5
I might have one, I'll check. Might still be available from yamaha?
|
|
|
|
Post by tsimi on Apr 24, 2017 9:55:40 GMT -5
We don't have Prebugs over here. Official Yamaha channels don't offer parts for that scoot here so if I need anything I will have to most likely order it in foreign countries.
|
|
|
|
Post by benji on Apr 24, 2017 10:01:57 GMT -5
Maybe I can get one then. I'll check it out.
|
|
|
|
Post by tsimi on Apr 24, 2017 10:06:03 GMT -5
Maybe I can get one then. I'll check it out. That would be awesome. Thanks. |
|
|
|
Post by benji on Apr 24, 2017 10:24:31 GMT -5
Shipping may suckered tho... I'm Seattle
|
|
|
|
Post by tsimi on Apr 24, 2017 11:21:20 GMT -5
Shipping may suckered tho... I'm Seattle Bubble bag! Cheap and quick. Airmail.  |
|
|
|
Post by PIG on Apr 24, 2017 13:10:59 GMT -5
I want that seat
|
|
|
|
Post by Jwhood on Apr 24, 2017 14:40:38 GMT -5
How much you pay for it tsimi?
|
|
