|
|
Post by quickkid81 on May 26, 2018 7:14:01 GMT -5
Hi guys, new to the forum but not to engines or scoots. I just acquired a daelum delphino, 100 cc two stroke.I am wondering if there are any parts that fit from other manufacturer's as in engines that they used to clone from or anything like that,beacuse my search hasn't turned up much.
Thanks for reading, hope to talk to and meet more scootlife people on here and help others as I can.
|
|
|
|
Post by oldgeek on May 26, 2018 7:26:17 GMT -5
 Greetings! I am not familiar with that brand/model. 100cc 2T's are uncommon in the USA. What is the engine layout, horizontal like the minarelli or vertical like the honda elite AF16?
|
|
|
|
Post by 90GTVert on May 26, 2018 7:34:33 GMT -5
|
|
|
|
Post by oldgeek on May 26, 2018 7:35:34 GMT -5
A search tells me that it is a variant of Honda's AF/16 50cc. Since yours is already a 100cc engine, your best bet may be a decent pipe, a carb tune and a CVT upgrade. Post some pictures if you get a chance.  |
|
|
|
Post by quickkid81 on May 27, 2018 12:42:22 GMT -5
Thanks for the help so far guys, I found out it is korean made and they collaborated with honda on this 2t 100cc enging and the layout is horizontal,upand down. I only paid 60 dollars with the title, the carb is clean as a whistle but I have no spark, I put a good coil from another running scooter and still no spark. Im dealing with a sub tropical storm right now and have to work outside so no fixing today. But tomorrow im going to wire a good cdi I have here and check but I think its the stator because when I turn it over with the electric start, the headlight doesnt come on but my digi volt meter broke so i cant check and I have parts so ill just throw them at it till it runs 😆
|
|
|
|
Post by quickkid81 on May 29, 2018 18:31:00 GMT -5
It has spark.
Now I need a 2t single plug cdi...
|
|
|
|
Post by oldgeek on May 29, 2018 19:11:26 GMT -5
It has spark. Now I need a 2t single plug cdi... Not sure I understand you. You say it has spark. Why do you need a CDI? |
|
|
|
Post by quickkid81 on May 30, 2018 8:31:35 GMT -5
I wired a 4t cdi just to check if it was bad 😆 should have explained that lol.
|
|
|
|
Post by quickkid81 on May 30, 2018 9:38:54 GMT -5
And I wont try and run it like that. No way...
|
|
|
|
Post by quickkid81 on May 30, 2018 16:43:53 GMT -5
So I got a break today from the rain and found a 2t cdi it runs and runs good now to put it back together and ride it and see if i can make a video.
|
|
|
|
Post by ApeShit70 on Jun 30, 2018 20:48:02 GMT -5
I think I may have missed out on a 100cc 2stroke scoot! I always ponder too long and then when I try to pull the trigger it's gone!
|
|
|
|
Post by quickkid81 on Jul 1, 2018 14:36:03 GMT -5
I had to get this one it was only 60 dollas now I just need a pipe
|
|
|
|
Post by oldgeek on Jul 1, 2018 14:59:50 GMT -5
I had to get this one it was only 60 dollas now I just need a pipe I use a V8 pipe from autotech from feebay on my motor that is very similar to yours. it is a good all around pipe. Likely a nice upgrade from stock. |
|
|
|
Post by quickkid81 on Jul 1, 2018 15:05:02 GMT -5
They run what, lije 160$?
|
|
|
|
Post by 'O'Verse on Jul 1, 2018 15:22:10 GMT -5
 They make a 124cc Taida bore 54x52mm for A/C. scooterswapshop.com/products/taida-55mm-ac-bore-kit. And even better would be to convert to a complete L/C set up made by Taida. Here's an older video of a guy on YouTube called Honda speed demon before he upgraded from 114cc to 120cc. youtu.be/gMFdlc6_BbE. If that's not enough you can always go hyper race. Just some things to think about....again Welcome.
|
|
They make a 124cc Taida bore 54x52mm for A/C.