|
|
Post by scootnewb on Feb 23, 2019 16:44:03 GMT -5
This is small room off of the kitchen. Since I was always running in and out to work on the scooter and other things over the past year, I turned it into a man cave or whatever they are called now. This project was pretty simple but the way my luck has been going I thought for sure I would fuck it up. Okay, what do you notice about these TV's?  AND  |
|
|
|
Post by gsx600racer on Feb 23, 2019 21:23:31 GMT -5
First one is on a articulating mount and no wires.
Second one shows no wires.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 23, 2019 21:43:14 GMT -5
Is it the door?
|
|
|
|
Post by scootnewb on Feb 23, 2019 21:59:06 GMT -5
Yes it was no wires but yeah, I guess the door is in both pics too. Three x HDMI, 1x Ethernet and 1x power hanging down made it look janky.   Speaking of janky, I've since replaced the brown extension cords with better ones. |
|
|
|
Post by lordhater on Feb 24, 2019 12:13:04 GMT -5
One thing I noticed is that they both are too small
|
|
|
|
Post by scootnewb on Feb 24, 2019 12:49:17 GMT -5
One thing I noticed is that they both are too small True. |
|
|
|
Post by 190mech on Feb 24, 2019 20:50:19 GMT -5
Howz a dude gonna finish a baad project watching a flat screen?I guess I'm just an old guy that likes to listen to hard rock while porting 2 strokes,to each his own...  |
|
|
|
Post by 90GTVert on Feb 24, 2019 21:33:29 GMT -5
Howz a dude gonna finish a baad project watching a flat screen?I guess I'm just an old guy that likes to listen to hard rock while porting 2 strokes,to each his own... I had to take the TV out of the garage because I kept messing things up trying to watch racing while working on stuff. lol |
|
|
|
Post by scootnewb on Feb 24, 2019 23:29:30 GMT -5
I wish I could work on the scooter in here. That will take place in the basement and there's no TV down there. These will be used for watching welding tutorials and other how to videos.
Now that I think about it, once the engine is out I could rebuild it in here. Awww yeah!
I want to be a gearhead but I 'm not too good at wrenching yet. BBK install or cam on a GY6 okay I can do that all day but that's about it. I do have a Keihin carb near the sink in the kitchen though.
|
|
