Beets
Scoot Member
Posts: 58
Location: Valparaiso,IN.
|
Post by Beets on Mar 27, 2020 19:50:15 GMT -5
Was wanting to upgrade clutch or rebuild as my next up grade. Going to buy a NCY kit or I can drill/lighten stock bell,replace pads(what kind) springs? Have blue contra spring but see eveyone sticks with stock. WhatI have already: 03' with 2,900mi, Uni intake kit, 38 idle,80 main+shim Polini cut boss Dr.pulleys sliders,new gates belt Lightened flywheel. Dr.D's pipe. Boppers at 43-45 mph. Rpms up to 9,800-9,900 Thanxs Beets
|
|
|
Post by Happypancake! on Mar 27, 2020 21:04:47 GMT -5
Springs won’t do much.
The NCY bell will eat clutch pads.
Change that Blue polini spring.
|
|
|
Post by Happypancake! on Mar 27, 2020 21:05:18 GMT -5
And use stock boss. Polini is too Long
|
|
Beets
Scoot Member
Posts: 58
Location: Valparaiso,IN.
|
Post by Beets on Mar 28, 2020 20:49:30 GMT -5
I have stock spring in just have blue on hand for clutch mod. Yes have stock boss on too and removed rubber on polini. Saw guys were drilling clutch bell to lighten. good Idea or no? Got time on my hands so looking to do next mod. Thanxs for info.
|
|