Post by wiscootsin on May 26, 2020 18:45:48 GMT -5
if anyone has a crank for a kymco cobra, original/used/whatever, i may be interested. Engine bearings went out and messed stuff up on this cobra after 30 ish miles. Either need to rebuild or dissassemble. will also need cylinder and piston/rings.
So if anyone has the originals leftover after putting in performance upgrades, let me know. Can't justify putting $400 of new parts into one that has no title and a rusted/scratched off VIN.
2T? I'll have a stock one out of my beamer. Don't think the bearings are bad enough to have damaged it, and the lower crank bearing was good when I checked 500 miles ago. Just waiting on the crank tools to arrive, and i'll be yanking it.
Last Edit: Sept 17, 2020 19:02:49 GMT -5 by df41590
05 Eton Beamer II aka Lil Blue- 70cc Polini Corsa, Polini For Race Crank, Yasuni R Exhaust, Pollini Hi-Speed Variator 5g weights, Stage6 Clutch/ 433 Bell( All Weights Installed) Red Clutch Springs, Delorto 21mm PHBG Carb, 105MJ 36PJ, ???mph top speed
05 ETon Beamer II aka Thumper- In pieces- Soon to have- 70cc Polini Contessa, Athena HPC Racing Crankshaft, TOP offset woodruff key, Technigas Next R exhaust, CF Reeds w/ Stage6 Intake, Polini Speed Clutch and Bell
Senna1Rossi: Thanks renagade281!
May 23, 2016 14:59:12 GMT -5
Fox: I don't really know how to say this but straight. I am Dave's Girlfriend Kellilee and bluntly and VERY SADLY he passed away early Tuesday morning. I know he would want ya all to know this. Thank You Brent for befriending my love he was very happy on here!
Jun 18, 2016 16:26:04 GMT -5
Fox: www.gofundme.com/29mgf6b8 I hope it is ok to pass on his gofundme page link. If not you will un-post it I'm sure. Thanks again all!!
Jun 18, 2016 16:31:18 GMT -5