Hello guys, new member here.

aimjewels
Scoot Member

Posts: 24

Hello guys, new member here. Jun 15, 2020 9:32:43 GMT -5 via Tapatalk

Quote

Post by aimjewels on Jun 15, 2020 9:32:43 GMT -5

I was looking around for some information on a DF50sst and ran across this forum link on a video on YouTube. I recently purchased one and was looking for a community forum that deals with them. Glad to see it seems I've been directed to the right path!

I have a df50sst like I stated before, bone stock. Motor is a 1P139QMA. From what I've read on here that's the same thing as 139QMA/QMA139. I am looking to upgrade the scooter to at least 45-50 mph. I've tried to research parts and where to start but, I'm unsure as to where to start. Since it's bone stock.

I've looked into 5g rollers, performance exhaust, new carb. I am fairly new to scooters. So I apologize if I'm not explaining my goal correctly.

So far I've got an ngk spark plug + coil, and I am going to add a digital tach.
I was going to start with the variator. Looking for more bottom end, with just a little more top end. At the moment since it's bone stock. Bought brand new. Came with .1 mile. Now has 119 miles. So I'm assuming I need a bit more time to break the engine in, should be good to go with another hundred miles on it or so I'm hoping. I hadn't pushed it for to long. Top speed so far has been around 32-33mph. I might reach 35 after a bit more time possibly.. But like I said I would like to achieve that 45-50mph mark. That would allow me to get out of the way of traffic when I need to. Which is why I would like a bit more top end as well. Decent take off, and respectable top end for my area. Houston, Tx

Excited to see what I can learn from this community. Hope you guys/gals are staying safe, and healthy!

-Art

Last Edit: Jun 15, 2020 10:17:28 GMT -5 by aimjewels

geoffh
Scoot Pro

Not mine just another lost scoot scared and very alone

Posts: 2,324

Hello guys, new member here. Jun 15, 2020 15:10:59 GMT -5 190mech likes this

Quote

Post by geoffh on Jun 15, 2020 15:10:59 GMT -5

Welcome to the forum,your best bet is to start a build thread from the get go,it helps us to follow your build and watch it progress,it,s a 4 stroke I think so you won,t hear much from me but welcome again.

Geoff

aimjewels Scoot Member Posts: 24	Hello guys, new member here. Jun 15, 2020 15:22:41 GMT -5 via Tapatalk Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by aimjewels on Jun 15, 2020 15:22:41 GMT -5 Thanks for the response. And advice. I'll attempt that.

geoffh Scoot Pro Not mine just another lost scoot scared and very alone Posts: 2,324	Hello guys, new member here. Jun 15, 2020 15:39:52 GMT -5 190mech and aimjewels like this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by geoffh on Jun 15, 2020 15:39:52 GMT -5 You will also find a wealth of self help in the tech section,use the directory on the left of the page to get there. Cheers it,s late here,Geoff

90GTVert
Administrator

Posts: 41,286

Location: Preston, MD

Hello guys, new member here. Jun 20, 2020 6:01:19 GMT -5 190mech likes this

Quote

Post by 90GTVert on Jun 20, 2020 6:01:19 GMT -5

With 45-50MPH as a goal, you need to plan on a big bore kit. CDI, rollers, exhaust and so on are only small steps toward that. 47mm big bore at minimum, possibly move up to 50mm+. The larger kits are more likely to cause a crank failure though. Also put a cam on your wish list.

Brent
Life is better at high RPM.

Zino
Scootaholic!

Posts: 3,789

Hello guys, new member here. Jun 20, 2020 8:30:42 GMT -5 190mech likes this

Quote

Post by Zino on Jun 20, 2020 8:30:42 GMT -5

welcome to the forum.
Dialing in the transmission you with a bigger better variator will get you a few mph .
When you get the tach you will be able to tell if you have a restricted cdi You wont rev past 7k most times even as you change rollers your rpms will stop at the same place .
A bigger engine will do the most to push you past 40

His and Hers 2004 Yamaha Vinos malossi bbk malossi wild lion, multi var polini green clutch springs 6.5 gram sliders 50 mph
2004 Yamaha Zuma 58 Mph Sport Build Sold
2019 Roughhouse Malossi Variator 6.5 Gram Sliders NCY Clutch NCY medium clutch springs Ncy Soft Contra Malossi Mhr Replica BBK Wild Lion Exhaust Dellorto 17.5 90 main 34 pilot 52mph

aeroxbud Scoot Legend! Posts: 13,682 Location: Portsmouth U.K.	Hello guys, new member here. Jun 20, 2020 8:43:50 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by aeroxbud on Jun 20, 2020 8:43:50 GMT -5 Welcome to the forum. Loads of information here to reach your goals.
	Yamaha Aerox NS50 2016 project Yamaha Aerox NS50 2016 Piaggio Typhoon 2019: Great scooter, poorly built (sold) Yamaha Slider 2002: The problem child (sold) Yamaha BWS NG: The Family affair (son now owns) Yamaha Aerox YQ50 2008: The fast one (sold) Yamaha Jog RR 2004: The first one (sold) Mrs Bud 10/06/22 you are not going to pull that engine apart and put lots of new bits in it, are you?

aimjewels
Scoot Member

Posts: 24

Hello guys, new member here. Jun 25, 2020 21:02:05 GMT -5 via Tapatalk

Quote

Post by aimjewels on Jun 25, 2020 21:02:05 GMT -5

Alright. So far. I've gotten a digital tac by koso, ngk spark plug + coil. Just ordered an 80cc bbk. As well as a larger rocker arm + cam. Ordered the parts from rollingwrenchdenver.com

Which cdi do you think I may need to swap over to? And possibly another carb.

aimjewels Scoot Member Posts: 24	Hello guys, new member here. Jun 25, 2020 21:10:58 GMT -5 via Tapatalk Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by aimjewels on Jun 25, 2020 21:10:58 GMT -5 And thank you for the welcome guys

aimjewels Scoot Member Posts: 24	Hello guys, new member here. Jun 25, 2020 21:25:00 GMT -5 via Tapatalk Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by aimjewels on Jun 25, 2020 21:25:00 GMT -5 Forgot to include the coil is ncy and the spark plug in ngk

aimjewels
Scoot Member

Posts: 24

Hello guys, new member here. Jun 28, 2020 12:54:27 GMT -5 via Tapatalk

Quote

Post by aimjewels on Jun 28, 2020 12:54:27 GMT -5

Which would be a good upgrade from stock car? I'm about to do an 80cc install when the parts come in. Just wanted to know what a good choice would be? Aside from the 80cc install the only other updates are listed above. I plan on doing maybe a performance variator or just buy a performance set that would come with springs and rollers. I need to find out what rollers it has stock. I think like 12g or something like that? DF50sst

Any suggestions are welcomed, thanks

90GTVert Administrator Posts: 41,286 Location: Preston, MD	Hello guys, new member here. Jun 28, 2020 16:20:03 GMT -5 190mech and aimjewels like this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by 90GTVert on Jun 28, 2020 16:20:03 GMT -5 19-20mm CV carb should be fine. Stock is often sealed and has a non-adjustable needle. Otherwise stock is usually alright for a 47mm bore.
	Brent Life is better at high RPM.

aimjewels
Scoot Member

Posts: 24

Hello guys, new member here. Jul 10, 2020 11:48:29 GMT -5

Quote

Post by aimjewels on Jul 10, 2020 11:48:29 GMT -5

I'm having a bit of a tough one. I'm trying to decide which bbk to get. The 60 or the 72/80. I'm only trying to be able to get around 50. I see ones on amazon and ebay. But I don't wan to purchase the wrong one. ( Missing parts ). Anyone know of a good "complete" kit? Been looking around

Last Edit: Jul 10, 2020 11:49:38 GMT -5 by aimjewels

geoffh Scoot Pro Not mine just another lost scoot scared and very alone Posts: 2,324	Hello guys, new member here. Jul 10, 2020 14:39:35 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by geoffh on Jul 10, 2020 14:39:35 GMT -5 Parts for scooters has a couple of members on here,and quite a few very happy customers I would steer away from eBay amazon etc and use specialist scooter supplier. Geoff

aimjewels
Scoot Member

Posts: 24

Hello guys, new member here. Jul 10, 2020 16:11:56 GMT -5 via Tapatalk

Quote

Post by aimjewels on Jul 10, 2020 16:11:56 GMT -5

I would like to have a conversation with them to find out more. I was hoping to stay away from eBay lol. I'll check them out. I wonder who the members are on here? I'll probably just have to give them a ring. Last thing I want to do is mix up parts after all. Thanks for the suggestion