|
Post by riccardoitalia on Jul 20, 2020 15:59:34 GMT -5
Hi everyone! Im from Italia! I started to assemble the engine of my 50cc Malaguti f10 (Minarelli-yamaha short case)to bring it to 98cc taking example from what has been done on this forum. the cylinder is a TWH d54 that I will mount with an Athena race 43mm shaft. does anyone know this cylinder? what performance have you achieved? I noticed that the piston head(top) is very rough, have you polished it? thank you! Sorry for my terribile english!
|
|
|
Post by aeroxbud on Jul 20, 2020 16:15:06 GMT -5
Welcome to the forum Ricardo. I'm not familiar with that cylinder. But post a build up so we can follow your progress.
|
|
|
Post by riccardoitalia on Jul 20, 2020 16:29:30 GMT -5
How can i post the photos?
|
|
|
Post by riccardoitalia on Jul 20, 2020 16:33:51 GMT -5
|
|
|
Post by riccardoitalia on Jul 20, 2020 16:36:47 GMT -5
|
|
|
Post by Zino on Jul 20, 2020 17:31:00 GMT -5
Welcome to the forum . Sharp looking scooter With that pipe and cylinder you are going to sneak up and blow by alot of people
|
|
|
Post by 190mech on Jul 20, 2020 18:03:41 GMT -5
|
|
|
Post by riccardoitalia on Jul 20, 2020 18:03:57 GMT -5
I Hope! Is my finally intention! Nobody Gere nows this cilinder becuose Gere the 90cc engine doesnt exist.
|
|
|
Post by riccardoitalia on Jul 20, 2020 19:34:45 GMT -5
|
|
|
Post by riccardoitalia on Dec 4, 2020 14:42:13 GMT -5
|
|
|
Post by riccardoitalia on Dec 4, 2020 14:44:05 GMT -5
Keep work on engine! The harddest parto Is going right on compressione and squish, maybe Need to spin on late the Head!
|
|
|
Post by 808ministroke on Dec 4, 2020 20:55:12 GMT -5
Great work so far man welcome home, Lol. I was born in America but M so Dang proud of my Italian blood anything to do with textiles or machinery or are even Artwork if it's not from Italy it's not top quality. I may be biased... I have try to make this exact cylinder work I had to mill the case to allow for fitting also notice that the piston casting at the top was poor quality However I never got to finish it as my 41.8 mm stroke was a hair shy I ended up cutting the top off the cylinder to match the stroke but by that time I realized it would not have a Great-Power band due to that anyways look for to your build and about that read cage with the 2 different channels in it I have seen those before online and always wondered how they would work out on A 2 stroke moped let me know what you think or what you Already know about these read cages as I find them fascinating also found intakes that have the same to channel design kind of thought they might work like read stuffers in the effect of channeling the flow.
|
|
|
Post by 808ministroke on Dec 4, 2020 20:56:30 GMT -5
O never mind looking back at your pictures there isn't a divider before the reads like I was thinking there was but still on that question I've seen in takes in read cages that have to channels what is everybody's opinion on these and as anyone ever used them???
|
|
|
Post by riccardoitalia on Dec 5, 2020 15:02:59 GMT -5
O never mind looking back at your pictures there isn't a divider before the reads like I was thinking there was but still on that question I've seen in takes in read cages that have to channels what is everybody's opinion on these and as anyone ever used them??? I have made it start by stock reedvalve. Is an expdriment
|
|
|
Post by Lucass2T on Dec 5, 2020 23:08:51 GMT -5
Nice work with the reeds, trenching, dowels to align the head!
|
|