|
Post by moofus02 on Jan 5, 2021 9:15:11 GMT -5
Been away to long. New job is 50 miles from home so every day riding stopped. Then in spring I couldn't find the keys to the 2 scooters that I was riding. After 2 years I found them. Bought a couple jet skies and snowmobile 2 years ago. Used the skies one summer but not the sled.
I renewed my cell tower contract for another 40 years then the following year sold the contract for a tidy profit and put a steel roof on the house. Then the wall of basement(root cellar) caved in and everyone wanted a fortune to repair it so this summer i jacked the house up and dug it out and poured a 9 foot high basement under the entire house plus a 16x16 addition. Got the addition closed in bought all new windows, new heat and air system. Doing siding in spring. Been working at finishing the basement out.
During this the wife wanted me to clean up a pile of boxes I had stashed upstairs. Scooter parts lol. Found a pipe and thought it was my mhr77 stuff I got from Ryan but when I pulled the pipe out I saw the peace sign. Dug deeper and found a 54mm cylinder kit. Don't even remember buying that. Think I got it from Nelson but don't know. This was a cool Christmas present lol.
Then I was stoked so I went to check Brent's T2 thread and had to go to page 150 to get caught up. I've got about 100 pages to go to get current lol. Been reading for over a week.
Can't wait to get this house done so I can start playing again. Once the basement is finished I've got to gut the main floor because the plaster is all busted from the house moving and coming back down on a level walls. Hope all is well with everyone.
After reading Brent's thread I'm convinced that I need a lathe also. When we say the house down i free spanned the basement. I've got 140 ft of I beam under here that I welded together. My contractor just showed up. Catch everyone later
|
|
|
Post by aeroxbud on Jan 5, 2021 9:43:34 GMT -5
You have been busy. No wonder you've no time for scooters. Glad your doing ok.
|
|
|
Post by oldgeek on Jan 5, 2021 9:57:46 GMT -5
Good to see you surface! Glad things are going good. Concerning the lathe, go as big as you can!
|
|
|
Post by Lucass2T on Jan 5, 2021 10:52:43 GMT -5
Good to see you back moof!
|
|
|
Post by nelson on Jan 5, 2021 12:47:50 GMT -5
Yep, pretty sure I sent you that cylinder. I have been missing for awhile as well but now we have moved to the middle of no where I'm ready to put my scoot back together
|
|
|
Post by 90GTVert on Jan 5, 2021 12:54:45 GMT -5
Glad to see you again Brian! I was afraid you may have been buried in a scooter parts avalanche.
|
|
|
Post by moofus02 on Jan 5, 2021 13:22:22 GMT -5
Glad to see you again Brian! I was afraid you may have been buried in a scooter parts avalanche. No doubt lol I found all kinds of stuff. Top trophy black kit i think for my pre bug, inner rotor ignition, pipes cases gears etc lol. Don't spoil it I've got a hundred pages to go on your thread yet. Right now you're rocking a tpr liquid kit that's working
|
|
|
Post by nelson on Jan 5, 2021 17:33:24 GMT -5
Glad to see you again Brian! I was afraid you may have been buried in a scooter parts avalanche. No doubt lol I found all kinds of stuff. Top trophy black kit i think for my pre bug, inner rotor ignition, pipes cases gears etc lol. Don't spoil it I've got a hundred pages to go on your thread yet. Right now you're rocking a tpr liquid kit that's working Wouldn't happen to have a subframe in there would ya?
|
|
|
Post by moofus02 on Jan 5, 2021 17:54:37 GMT -5
No doubt lol I found all kinds of stuff. Top trophy black kit i think for my pre bug, inner rotor ignition, pipes cases gears etc lol. Don't spoil it I've got a hundred pages to go on your thread yet. Right now you're rocking a tpr liquid kit that's working Wouldn't happen to have a subframe in there would ya? Somewhere I've got or had a China short case sub frame and intake for the stock rear carb
|
|
|
Post by captincvmn on Jan 5, 2021 20:46:32 GMT -5
The wall collapse sounds dreadful. Glad things are mended.
|
|
|
Post by Zino on Jan 5, 2021 21:04:57 GMT -5
welcome back
|
|
|
Post by nelson on Jan 6, 2021 20:49:47 GMT -5
Wouldn't happen to have a subframe in there would ya? Somewhere I've got or had a China short case sub frame and intake for the stock rear carb Well, if you come across it let me know and I will buy it. Will it fit a jog? I bet it will, will also buy the intake(long as its not china)
|
|
|
Post by moofus02 on Jan 7, 2021 6:23:15 GMT -5
It might be a while. Everything is a mess with all the construction lol
|
|
|
Post by moofus02 on Jan 12, 2021 17:21:31 GMT -5
Well just got done reading Brent's thread from page 150 to 310. I feel his pain
|
|
|
Post by nelson on Oct 8, 2021 15:49:47 GMT -5
It might be a while. Everything is a mess with all the construction lol [br You find this thing yet? Lol
|
|