Post by mkksat13 on Jun 23, 2023 10:42:56 GMT -5
Malossi OR variator 6g sliders & torque driver. Fly clutch, 1500 contra,
Not sure which clutch springs I have in there, can’t remember. But, this is not a new set up. CVT was tuned perfectly with the old 70 bbk. It’s starting to bog up when sitting idle and when I’m just starting to take off. Also does it while running and come off the throttle and roll for a bit then give it gas and BOG. What does moving the needle clip up do? I’ve read on her that should be done. I went back to the 24mm carb but changed the main to 85. Would that cause a rich spitting bogging condition? Thanks!
Not sure which clutch springs I have in there, can’t remember. But, this is not a new set up. CVT was tuned perfectly with the old 70 bbk. It’s starting to bog up when sitting idle and when I’m just starting to take off. Also does it while running and come off the throttle and roll for a bit then give it gas and BOG. What does moving the needle clip up do? I’ve read on her that should be done. I went back to the 24mm carb but changed the main to 85. Would that cause a rich spitting bogging condition? Thanks!