|
|
Post by billwill on Mar 23, 2024 20:46:38 GMT -5
Appreciate that! I'm not even sure yet. More than likely a prebug or bugeye Zuma. I think if I really wanted to, I could swap some 13" Aerox wheels onto this. I even have an extra set here now. I would verify they fit before you go much further. If you get 13" wheels to fit a short case mina you would need rubber bands for tires.  Is the prebug or horizontal technically a long or short case? I was comparing the two in the garage but stupidly not measuring the wheel area haha. Just axle to front of case. I know I’ve see people run Aerox wheels on the bugeyes but I hear you loud and clear and am going to do some more digging. Thanks for looking out! |
|
|
|
Post by billwill on Mar 23, 2024 20:47:44 GMT -5
“Senchen” cylinder? Sound a bit, well, knockoff-like  Curious as to what the insides will look like. By the pics you posted, it looks a bit dirty but decent, so it might be a good base to build something epic on  Peep my post. She’s cracked open now - as dirty as expected lol. |
|
|
|
Post by oldgeek on Mar 23, 2024 20:54:47 GMT -5
I would verify they fit before you go much further. If you get 13" wheels to fit a short case mina you would need rubber bands for tires. Is the prebug or horizontal technically a long or short case? I was comparing the two in the garage but stupidly not measuring the wheel area haha. Just axle to front of case. I know I’ve see people run Aerox wheels on the bugeyes but I hear you loud and clear and am going to do some more digging. Thanks for looking out! I fit Vento Zip 12" wheels with 100/60 tires on my short case mina. Don't think there is room for much more. |
|
|
|
Post by billwill on Mar 23, 2024 21:06:31 GMT -5
Is the prebug or horizontal technically a long or short case? I was comparing the two in the garage but stupidly not measuring the wheel area haha. Just axle to front of case. I know I’ve see people run Aerox wheels on the bugeyes but I hear you loud and clear and am going to do some more digging. Thanks for looking out! I fit Vento Zip 12" wheels with 100/60 tires on my short case mina. Don't think there is room for much more. Looks like it’s possible but with some work: 49ccscoot.proboards.com/post/384528/threadWhatever the case (no pun intended) I think I will ultimately end up running this thing in a prebug Zuma or bug eye Zuma and figure out the wheels later. Even if only 12” is possible, I can live with that. I’m curious what you’d think I’d be able to obtain a long case for. I even thought about going for rc-one cases to save myself all the milling to fit a larger crank but they are just so pricey. |
|
|
|
Post by 808ministroke on Mar 26, 2024 20:46:46 GMT -5
check ebay, or shit I have a long case with rear disc and 13 inch wheel I'll sell you for 150 plus shipping
|
|
|
|
Post by billwill on Mar 31, 2024 8:23:32 GMT -5
check ebay, or shit I have a long case with rear disc and 13 inch wheel I'll sell you for 150 plus shipping Appreciate it but I lucked out and have sourced a long case! Sounds like a good deal. Just saw your ad too. Rear disc break is really nice and if I didn’t have to mill for a stroker crank I’d be taking you up on it. |
|
