|
Post by 2strokd on May 12, 2010 9:16:10 GMT -5
I put my street set-up back on Skeedr last night. Its a iron Polini Corsa kit with a Leo pipe, etc....Got bored and made a little mount to put my cam on the handlebars ;D. Its screwed on right were the mirror would be if i used em. FARE WARNING! The audio sucks bad so turn your volume down! This cam has always fuzzed out around loud stuff, anybody got any ideas to remedy that? BTW, my headlight sucks, and this isnt a very good vid. No speed runs or anything, just a little test run to my buddies house around the corner
|
|
|
Post by 90GTVert on May 12, 2010 10:08:58 GMT -5
Good spot for a mount. From what I could tell it doesn't look real shaky. The only thing I know of to help with volume/wind would be to cover the mic with masking tape. Maybe a little foam if necessary. Try that again for us in the daytime so we can see something! ;D
|
|
|
Post by 2strokd on May 12, 2010 12:54:46 GMT -5
Ok i put some foam over the mic on the cam. Gonna put a rubber washer in there also... I will do this run in the daytime :scoot:
|
|
|
Post by stepthrutuner on May 12, 2010 13:38:26 GMT -5
I think it's cool. Sounds like a top fuel dragster when you first fired it up. :thumb:
|
|
|
Post by 2strokd on May 12, 2010 14:12:02 GMT -5
This ones not much better other than the daylight . Think im gonna wait until we have a better cam and quit messing with this one before i break it. I kept wanting to wheelie or go faster but it just looks too weak at the mounting point for that . The audio sucks on this one too. I think it has allot to do with it being attached to the bars, with all the vibration.
|
|
|
Post by 2strokd on May 12, 2010 14:13:32 GMT -5
I think it's cool. Sounds like a top fuel dragster when you first fired it up. Thanks Reg, i thought the same thing when i checked it out the first time
|
|
|
Post by 90GTVert on May 12, 2010 15:07:08 GMT -5
Thanks for the ride! I thought the vid was alright.
|
|
|
Post by stepthrutuner on May 13, 2010 10:37:57 GMT -5
Good vid. Wish we lived close enough to ride together.
|
|
|
Post by 2strokd on May 13, 2010 12:17:21 GMT -5
Good vid. Wish we lived close enough to ride together. Me too buddy . Wish we all lived close enough to ride together :riding:
|
|
|
Post by Reign on May 13, 2010 14:13:57 GMT -5
Good vid. Wish we lived close enough to ride together. Me too buddy . Wish we all lived close enough to ride together We might ride together at the next scooter event ;D I told my dad about TNG, and he said that the next time I know about a scooter event like that, to tell him so he can take off of work and we can take a road trip :cager: :scoot2:
|
|
|
Post by 2strokd on May 24, 2010 8:39:00 GMT -5
Last Skeedr cam vid with this camera . Its just too hard on the cam, plus the audio sucks
|
|
|
Post by 90GTVert on May 24, 2010 9:11:35 GMT -5
Yeah, that does look like the cam is less than happy on Skeedr. Better to stop now. I ruined one on T2 after one ride.
|
|
|
Post by WT100 on May 24, 2010 15:30:58 GMT -5
I'm diggin that camera location. Makes the turns feel extreme! The cam is picking up RF interference from that wicked 2T. Isolating it with rubber may help a little but i think it looks pretty good.
|
|
|
Post by 2strokd on May 25, 2010 6:19:25 GMT -5
With the F-brace and the motor mount being the way it is...Well the whole combo just isnt right for a cheaper cam. I like the mounting point also Tim! Im thinking a better cam would sit just fine right there someday?
|
|
|
Post by WT100 on May 25, 2010 7:14:16 GMT -5
Yup. I've never been happy with the mount points on my POV cam. Too much vibration on the back so i think i"ll try that spot for our club ride this weekend. We'll see what diff the camera makes.
|
|