|
|
Post by 190mech on Mar 6, 2014 19:24:48 GMT -5
|
|
|
|
Post by Sitticuss on Mar 7, 2014 13:18:28 GMT -5
Pulled out the bearings and ordered new ones with a larger I.D. to fit the old axle
|
|
|
|
Post by Sitticuss on Mar 9, 2014 18:18:21 GMT -5
Still got that anonymous grinding noise sometimes when using the electric start. My carburetor order says it's still being processed. What are they building it there??? My wife is happy with her new scooter. She told me she had it up to 43 mph. That's pretty fast for her. She is taking it to work everyday. She will give it a slower break in than I ever would. I've stopped tweaking with it so she can drive it everyday. She has been super cool about not being able to drive it while I was messing with it. So I figured it's time for her to have fun. I did get to take it out the other day for a short ride and wasted a hot chick on a stock 50cc 4t. Not much of a victory but it was soooo fun...  |
|
|
|
Post by 190mech on Mar 9, 2014 19:55:09 GMT -5
Gotta LOVE a two stroke!!  |
|
|
|
Post by nelson on Mar 12, 2014 8:24:45 GMT -5
Haha I dusted a guy yesterday on a ruck. I was on my 70cc jog and cruised up beside him and just kinda ride along until we caught a light. I never passed him and we cruised about 40 mph. When the light turned green he took off and I wasn't even revved. By 100ft I caught and passed him and never saw him again. Haha
|
|
|
|
Post by Sitticuss on Mar 13, 2014 11:16:25 GMT -5
So my carb is stuck in customs from canada.....why the hell does it take so freakin long??? I though China would take longer...Do we really hate canada that much...lol. I ordered a computer from there and it took almost two months to arrrive. China taiwan Ten days....sigh
|
|
|
|
Secret 90
Mar 14, 2014 8:46:05 GMT -5
via mobile
Post by 2stroked on Mar 14, 2014 8:46:05 GMT -5
Can't the customs officials tell a carb from a loaded carbine? What the heck do they think it is? A miniature war head?lol
I hope things will work out for you soon.
Chris
|
|
|
|
Post by 2strokd on Mar 14, 2014 11:30:38 GMT -5
Lol, i gotta call this AM myself from customs asking what my "base gasket are made out of? And where are these parts made?"
Same story, same dance, same place, same name, same address.
|
|
|
|
Post by Sitticuss on Mar 14, 2014 11:41:28 GMT -5
I've ordered parts from all over the world...Maybe Canada was the last straw and now I'm on a list somewhere....  |
|
|
|
Post by Sitticuss on Mar 14, 2014 15:23:10 GMT -5
took the scooter out for its first real run since the new BBk. This thing is beast even compared to the old stock 52mm. Top speed is down though to 47 mph at 7800rpm. After that the rpm's want to climb fast 52mph at 9200rpm. Before i got a top speed of 53 at about 7600 rpm. The only difference in the two setup's was an increase from 6.5g rollers to 8g rollers.
|
|
|
|
Secret 90
Mar 14, 2014 19:04:47 GMT -5
via mobile
Post by nelson on Mar 14, 2014 19:04:47 GMT -5
Man I am so jelly of that cylinder ! I want one. Is that a 100cc exhaust you are running?
|
|
|
|
Secret 90
Mar 14, 2014 19:07:43 GMT -5
via mobile
Post by nelson on Mar 14, 2014 19:07:43 GMT -5
And you are still running stock carb? Man I bet that scoot has some grunt! Have you had any tuned 70cc bbk before? I just wonfer the power difference.
|
|
|
|
Post by Sitticuss on Mar 14, 2014 19:34:04 GMT -5
still running the stock carb....blows my 50cc with the BBK away. I had to swap the pipe when I went to a BBk from the cheapo I was using. Did some grinding on the outside of the exhaust port on the jug to make sure the hole matched up well with the pipe. Once I dial in the CVT some more it should be even better.This is the pipe I am using now....  |
|
|
|
Secret 90
Mar 14, 2014 19:48:54 GMT -5
via mobile
Post by nelson on Mar 14, 2014 19:48:54 GMT -5
Is that a 100cc pipe or is it just one of those ebay pipes for 130 $ ?
|
|
|
|
Post by moofus02 on Mar 15, 2014 9:26:39 GMT -5
As long as the stinger is big enough it should work ok. Looks good
Sent from my SPH-L720 using proboards
|
|
