|
|
Post by 190mech on Jul 20, 2010 19:03:52 GMT -5
Installed that cam yet?How'd it do??
|
|
|
|
Post by Goosey on Jul 20, 2010 19:59:48 GMT -5
LOL, not yet saddly. I get one day off a week, and to get to the valve section I have to pretty much take the scooter apart and I need it to get to work. Takes a little time. I was hoping to get it done this Saturday. Take a fan out to my shop if it's hot, hope for no thunderstorms...I have a new variator and clutch, and spring coming too, those will be easy, one thing at a time to compare results though.
|
|
|
|
Post by 190mech on Jul 20, 2010 20:23:59 GMT -5
Wow! Youre lucky to have a day off  ,Please give us a full report when its done! |
|
|
|
Post by Goosey on Jul 20, 2010 20:40:57 GMT -5
It is nice to have a regular day off. I tend to waste them. Last Saturday I did a Dr. Who marathon with my daughter.
|
|
|
|
Post by Goosey on Jul 24, 2010 18:54:20 GMT -5
Question, is it normal for the A9 to run clackier than the stock? I have tried adjusting valves, normally I go .08mm, I've gone down to .o6mm and still sounds clacky.
|
|
|
|
Post by 90GTVert on Jul 24, 2010 19:18:38 GMT -5
Cams with more aggressive profiles often make a bit more noise.
|
|
|
|
Post by Goosey on Jul 24, 2010 20:13:55 GMT -5
Ok. I just didn't want to leeve it in if it was goofy. Thanks. It will take a bit of getting used to. I left it at .07mm, seemed to sound the best. I waisted most of my afternoon trying different valve settings, so I won't be putting the body back on til after work tommorow. I even have to move the gas tank to get to the last bottom bolt on the cover, PITA. Looks like 83 and sunny, should be a good day for a test drive.
|
|
,Please give us a full report when its done!
