|
|
Post by Scootrific on Apr 16, 2015 10:14:24 GMT -5
Does anyone have hazard warning lights, installed to a scooter? I´m planing to install the to my scoot, but I do not know how. Also I don´t know, what things are needed to do this operation.
Things I have:
1. about 1 m lenght wire red/black
2. switch for hazard lights (with 3 terminals)
|
|
|
|
Post by Scootrific on Apr 16, 2015 11:43:12 GMT -5
|
|
|
|
Post by Scootrific on Apr 16, 2015 11:46:08 GMT -5
Things needed: Handlebar Mount Switch x1 Electronic Double Contact Relay w/Connector x1 3-pin Blinker Relay w/Connector x1 10A fuse & holder w/Connectors x1 2-into-1 Connectors x2 Quick Splice Connectors x2 Battery Ring Terminal x1 How to wire:  |
|
|
|
Post by 90GTVert on Apr 17, 2015 10:36:35 GMT -5
I just used a simple SPST switch and a small amount of wire to do mine. I don't have a dedicated hazard lights switch right at my thumbs, but whenever I've used them it's for breaking down on the side of the road or some situation where time to reach down and switch them on is not an issue. I turn the switch on and all 4 lights flash when I hit either turn signal. I turn the switch off and my signals operate normally. 49ccscoot.proboards.com/thread/1574/hazard-lights-4-flashers-mod |
|
|
|
Post by Sitticuss on Apr 18, 2015 0:38:59 GMT -5
My baccio vx 50 came with them.Pretty much what you posted already
|
|
|
|
Post by Scootrific on Apr 28, 2015 20:32:50 GMT -5
I just used a simple SPST switch and a small amount of wire to do mine. I don't have a dedicated hazard lights switch right at my thumbs, but whenever I've used them it's for breaking down on the side of the road or some situation where time to reach down and switch them on is not an issue. I turn the switch on and all 4 lights flash when I hit either turn signal. I turn the switch off and my signals operate normally. 49ccscoot.proboards.com/thread/1574/hazard-lights-4-flashers-modOh. that is more simple version. I Think, I´ll try that  |
|
