|
|
Post by sai on Jul 18, 2015 3:16:50 GMT -5
Does anyone know if the stage 6 pro replica will fit on a lymco super 8 2T ?
i was told that it won't fit at all and that leo Vince zx R is as good as it gets on my kymco?
|
|
|
|
Post by spaz12 on Jul 18, 2015 3:31:30 GMT -5
|
|
|
|
Post by sai on Jul 18, 2015 3:56:30 GMT -5
Mo spoke to them a week ago and they are the one who told me it won't fit a kymco? |
|
|
|
Post by spaz12 on Jul 18, 2015 4:00:55 GMT -5
The site says they're for Kymcos. Those linked are for the Super 8 and if you look at the ones for the super 9, they are the same. Email them. They usually respond with a day.
|
|
|
|
Post by sai on Jul 18, 2015 4:12:53 GMT -5
The site says they're for Kymcos. Those linked are for the Super 8 and if you look at the ones for the super 9, they are the same. Email them. They usually respond with a day. My actually spoke to them today. The tecnigas rs11 in that list is not any better, maybe worse than my leo Vince. I I really want that stage 6 pro replica, but if they don't make one for kymco, I'll stick with my leo Vince. www.stage6-racing.com/download/s6_2013_EN.pdfif you look in the exhaust section, it gives the compatibility. Did you say my bike is minaret like base? |
|
|
|
Post by 190mech on Jul 18, 2015 4:22:42 GMT -5
Your engine has those big lower lugs for the stand,a Minarelli doesnt,so the headpipe has a different curve to clear them..
|
|
|
|
Post by spaz12 on Jul 18, 2015 4:23:32 GMT -5
According to the threads I was reading today, you can use a Minarelli cylinder from, say a Zuma. And, according to the threads, you would have to use a different exhaust.
So, technically, you could buy both a Zuma cylinder and Zuma pipe....A lot of choices! THE PROBLEM though, is that more than likely, almost certainly, You'd have to fabricate a new mount for the pipe. Certainly doable. But do you have the means to have it done? That's the big question.
|
|
|
|
Post by spaz12 on Jul 18, 2015 4:25:20 GMT -5
Your engine has those big lower lugs for the stand,a Minarelli doesnt,so the headpipe has a different curve to clear them.. This is also true^^^ |
|
|
|
Post by sai on Jul 18, 2015 4:28:18 GMT -5
According to the threads I was reading today, you can use a Minarelli cylinder from, say a Zuma. And, according to the threads, you would have to use a different exhaust. So, technically, you could buy both a Zuma cylinder and Zuma pipe....A lot of choices! THE PROBLEM though, is that more than likely, almost certainly, You'd have to fabricate a new mount for the pipe. Certainly doable. But do you have the means to have it done? That's the big question. So the Stage 6 Pro replica doesn't fit my soon to be Liquid cooled Super 8? That catalog has a list of compatible engines which I'm not sure what mine is. If that's the case... I'll stick with my Leo Vince and just powder coat it. (it's really rusty right now) |
|
|
|
Post by spaz12 on Jul 18, 2015 4:37:21 GMT -5
The Leo Vince is a good pipe. I had one for a long time and loved it.
|
|
|
|
Post by sai on Jul 18, 2015 4:40:37 GMT -5
The Leo Vince is a good pipe. I had one for a long time and loved it. So we are ABSOLUTELY sure the Stage 6 won't fit? |
|
|
|
Post by spaz12 on Jul 18, 2015 4:45:00 GMT -5
well, if there's one out there that's made for it, I haven't been able to find the seller that has it listed for sale...
|
|
|
|
Post by spaz12 on Jul 18, 2015 4:51:17 GMT -5
You could do what these people have done and have it re-welded to work... This is a C16 I believe. You could do the same with the Stage6 pipe. But as 190mech said, the pipe will be in the way of the center stand. You'd be forced to also make a side stand if you don't already have one. Doable though.  |
|
|
|
Post by tiny on Jul 18, 2015 7:18:27 GMT -5
Sai try and contact the guys at Studio Cycle here in Toronto they work and sell mostly KYMCOs they should be able to answer most of your questions.
|
|
|
|
Post by sai on Jul 18, 2015 9:23:42 GMT -5
You could do what these people have done and have it re-welded to work... This is a C16 I believe. You could do the same with the Stage6 pipe. But as 190mech said, the pipe will be in the way of the center stand. You'd be forced to also make a side stand if you don't already have one. Doable though. Isn't the kick for the center stand on the otherside where the air filter box is? And yes, I recognize that pipe, it's a Yasuni =) |
|
