|
|
Post by 'O'Verse on Nov 29, 2016 18:01:00 GMT -5
Was gonna be a drag build. Couldn't find a kiesler frame still around for cheap. So I bit the bullet and decided to re-modify my 1993 Yamaha jog. Started as this....  |
|
|
|
Post by 'O'Verse on Nov 29, 2016 18:03:35 GMT -5
A little under two hours later... bare frame. 90cc longcase, 54mm Hoca BBK, 21mm Dellorto, Hoca variator, and Technigas next-R 100cc exhaust (60mph motor) with globs of torque ready for donor scooter.   |
|
|
|
Post by drc174 on Nov 29, 2016 18:07:27 GMT -5
|
|
|
|
Post by PIG on Nov 29, 2016 18:09:31 GMT -5
Everyone is going big it seems. There's going to be multiple 80 maybe 90 mph machines here. The race to 90 mph is on! Who's gonna get there first...
|
|
|
|
Post by 'O'Verse on Nov 29, 2016 18:38:18 GMT -5
Everyone is going big it seems. There's going to be multiple 80 maybe 90 mph machines here. The race to 90 mph is on! Who's gonna get there first... 60mph "Was" fast... |
|
|
|
Post by thephranc on Nov 29, 2016 19:20:51 GMT -5
Everyone is going big it seems. There's going to be multiple 80 maybe 90 mph machines here. The race to 90 mph is on! Who's gonna get there first... I'm shooting for 100. |
|
|
|
Post by spaz12 on Nov 29, 2016 19:41:06 GMT -5
|
|
|
|
Post by PIG on Nov 29, 2016 20:00:39 GMT -5
Everyone is going big it seems. There's going to be multiple 80 maybe 90 mph machines here. The race to 90 mph is on! Who's gonna get there first... 60mph "Was" fast... Ya times have changed. 60mph is quarter throttle cruzing speed now |
|
|
|
Post by ryan_ott on Nov 29, 2016 20:10:22 GMT -5
It's funny you guys mention 60. That used to be the mark to beat. Now with a "tame" combo setup properly that's easily optioned. 70 isn't too hard to get either. I guess this is where scooter tuning is going. Brraappp!
|
|
|
|
Post by 'O'Verse on Dec 3, 2016 21:07:05 GMT -5
|
|
|
|
Post by Jwhood on Dec 3, 2016 22:15:12 GMT -5
Can't wait to see this build progress.!!
|
|
|
|
Post by 'O'Verse on Dec 3, 2016 23:04:10 GMT -5
Can't wait to see this build progress.!! Yeah me either. If everything goes as planned I should be able to order the engine within the next 3 weeks. |
|
|
|
Post by 'O'Verse on Dec 4, 2016 17:04:33 GMT -5
|
|
|
|
Post by 'O'Verse on Dec 4, 2016 19:01:45 GMT -5
Such a good thing.   |
|
|
|
Post by tsimi on Dec 4, 2016 19:01:47 GMT -5
Oh this is gonna be very interesting. Curious to see how those radiators will fit and look once the panels are back on.  |
|
