|
Post by joggybro on Sept 13, 2017 19:08:00 GMT -5
Hi guys i blew one of my reed valves on my 5bm engine,i had some reed petals for a normal 3kj engine but these are too small.
The reed block on the 5bm engine is angled for improved flow etc.. whereas the normal minsrelli reedblock doesnt fit the 5bm case.
Can somekne point me in the right direction to get a replacement racing reedblock or carbon reed petals to fit?
|
|
|
Post by oldgeek on Sept 13, 2017 19:23:52 GMT -5
Here is one, but you should be able to find a better deal somewhere. If you get this one be sure to remove the metal fingers that back up the carbon reeds, I had one of those fingers go through a motor. 5BM reed block and intake
|
|
|
Post by Raizer on Sept 15, 2017 2:27:18 GMT -5
tsimi might know where to find one, from memory he's been playing with 5bm engines.
|
|