|
|
Post by badluna on Oct 21, 2017 21:32:35 GMT -5
Lol. Not really. Just my filter keeos getting crushed by my seat bucket. Plus I read some where that the engine benefits from the push and pull of suckingnair doen a tube. Here it is imgur.com/a/9h01M |
|
Rune 75
Scoot Enthusiast
Posts: 441
|
Post by Rune 75 on Oct 22, 2017 4:39:40 GMT -5
That looks great. Did it reduce sound ? Any difference in performance ?
|
|
|
|
Post by badluna on Oct 22, 2017 10:45:50 GMT -5
That looks great. Did it reduce sound ? Any difference in performance ? Didnt even effect my tune. I used 1 1/2 pvc. I guess that's plenty for the engine. Besides the top of the engine dosnt get nearly as hot as the inside of a cars hood. Cabt imagine theres a significant reduction of air temp here. |
|
|
|
Post by AtariGuy on Oct 24, 2017 15:27:18 GMT -5
Is it black abs or pvc painted black? Read somewhere (old fish tank hobby) that abs is much lower temp rated and softer - 4ft of 2 inch abs pipe can sag when full of room temp water, 120f is its limit with supports every 2 ft and 150f is max temp before it craps out completely. Which is why i plumbed a 180 gal and four 75 gal tanks with pvc instead of abs... though the abs would have looked better...
|
|
|
|
Post by badluna on Oct 28, 2017 12:10:31 GMT -5
Pvc painted black. No body in this area uses abs. The stores dont even stock it. I only used it because we buy it in bulk for so cheap!. This mod probably costed me a dollar lol.
|
|
