joseph09
Scoot Junior
hello everyone and thank you for allowing me to join.
Posts: 11
|
Post by joseph09 on Nov 12, 2017 14:48:40 GMT -5
I had my scoot belt drive come off and it was running and now that I have replaced it, it wont start or even sound the same. it does not sound like it for some reason.
I do not know what to do with it as it is the only transportation I have.
|
|
|
Post by tortoise2 on Nov 12, 2017 15:02:03 GMT -5
taotao scoot . . belt drive come off . . replaced . . wont start 50 or 150cc? If belt fragmented . . were variator and clutch disassembled and cleaned? Is electric starter not energizing? Is kick-lever start not fuctional?
|
|
joseph09
Scoot Junior
hello everyone and thank you for allowing me to join.
Posts: 11
|
Post by joseph09 on Nov 13, 2017 6:43:24 GMT -5
everything is engaging from what I can see but it sounds sick now that I have put on the new belt. I had this same problem with my peace sports 50 scoot. it is driving nuts and I walk everywhere now. The electric is energizing and kick starter is there but it does not work.
I might do a video and you can hear what I hear.
|
|
|
Post by benji on Nov 13, 2017 10:17:34 GMT -5
Maybe valve adjustment needed? Maybe the belt install made a current problem worse. Sorry if it's not much help, I don't know much about 4t stuff.
|
|
|
Post by humanshield on Nov 13, 2017 11:00:35 GMT -5
A video is worth 10,000 words.
Chances are, once the experts here actually hear it, they can tell you in an instant what is wrong.
|
|
joseph09
Scoot Junior
hello everyone and thank you for allowing me to join.
Posts: 11
|
Post by joseph09 on Nov 14, 2017 11:54:53 GMT -5
it is a tao tao 50 cc is what the scooter is. still trying to upload a video
|
|
|
Post by tortoise2 on Nov 14, 2017 12:26:38 GMT -5
|
|
|
Post by gsx600racer on Nov 14, 2017 15:37:03 GMT -5
I have a feeling that your rollers in variator are not installed properly. They probably fell out of place when you had issues with the belt.
|
|
joseph09
Scoot Junior
hello everyone and thank you for allowing me to join.
Posts: 11
|
Post by joseph09 on Nov 15, 2017 12:31:25 GMT -5
here is the video I hope it works!
|
|
joseph09
Scoot Junior
hello everyone and thank you for allowing me to join.
Posts: 11
|
Post by joseph09 on Nov 15, 2017 12:32:41 GMT -5
|
|
|
Post by greginisn on Nov 16, 2017 2:45:16 GMT -5
Guessing OP’s belt was shredded to the point the size stamping may have been destroyed. From what I can see on video scoot looks much like an ATM 50, if so it would be a 669 mm belt?
Greg
|
|
joseph09
Scoot Junior
hello everyone and thank you for allowing me to join.
Posts: 11
|
Post by joseph09 on Nov 16, 2017 8:27:39 GMT -5
x-pro 18-30 gy6 50cc belt.
|
|
|
Post by tortoise2 on Nov 16, 2017 12:28:29 GMT -5
taotao scoot . . wont start Video shows engine starting . . but stalling when rear tire contacts ground. Speculating clutch is not free-wheeling . . gremlin could be internal belt fragments, clutch pad not retracting, or perhaps a backed-off large clutch nut contacting the inner bell surface.
|
|
joseph09
Scoot Junior
hello everyone and thank you for allowing me to join.
Posts: 11
|
Post by joseph09 on Nov 18, 2017 10:14:29 GMT -5
thank you for all your assistance and now we hunt for impact tool to take off the clutch pad...will let you know how it is going.
|
|
|
Post by badluna on Nov 18, 2017 10:21:37 GMT -5
You dont need a impact. You can buy the variator locking thing for cheap online.
|
|