|
Post by Raizer on Dec 30, 2017 0:15:03 GMT -5
I've got one coming now, where was yours leaking from? Should I order a gasket kit to have on hand for it?
|
|
|
Post by lilpinny on Dec 30, 2017 0:45:58 GMT -5
I spent three years living in Australia and I hated ordering stuff from the US. What I found is that it was cheaper if I had a buddy in the US buy something and then send it in a flat rate box from the post office. www.usps.com/international/priority-mail-international.htmIt’s a single price, whatever will fit in the box. Good for when you want a bunch of stuff.
|
|
|
Post by benji on Dec 30, 2017 11:20:29 GMT -5
I've got one coming now, where was yours leaking from? Should I order a gasket kit to have on hand for it? I would order a gasket kit and a jet kit, possibly a clear bowl too. It would leak from everywhere haha, but not crazy bad. It didn't drip alot or anything but there was always a stain/trail of premix on my cvt cover below the carb. Mine was also used when I got it. Overall a good carb, pwks are nice to tune Imo. The black paint came off first time I blasted it with carb cleaner, so I don't be surprised if it chips away a little.
|
|
|
Post by benji on Dec 30, 2017 11:22:13 GMT -5
The downside to a pwk carb is the big foam air filter needed to run it. I had a bell mouth attached to a unifilter and it ran good but Rich. Especially at idle. I could never get it to run well unless it was slightly rich.
|
|
|
Post by Raizer on Dec 30, 2017 21:18:53 GMT -5
I'm going to attempt running it with a kart airbox, hopefully it helps!
|
|
|
Post by Lucass2T on Dec 31, 2017 4:47:05 GMT -5
I'm going to attempt running it with a kart airbox, hopefully it helps! I think thaigyro told something about these being crap. Made to look like a real kart filter but were made only for extra more and made less hp.
|
|