|
|
Post by awashbu12 on Sept 29, 2018 14:11:46 GMT -5
Ok let me start by saying I have searched every freaking board I can find trying to figure out how to correctly run my vac. And breather lines.. but there is so many different setups and none of them seem to match mine.. can you guys watch my video and tell me how to correctly run these lines?? youtu.be/pODIkcRo5UQ |
|
|
|
Post by awashbu12 on Sept 29, 2018 14:22:42 GMT -5
Well I just figured out that what I called a crank case is not a crank case at all. Haha my bad. Still learning these things
|
|
|
|
Post by scooterpimp on Sept 29, 2018 14:28:14 GMT -5
Hoses / fuel lines look to be routed properly.the smaller hose from valve cover goes into the stock aircleaner hose that clamps to back of carb. Would check for possible vacume leaks , dirty carburetor /jets , etc. Possibly due for valve ajustment. The tech. Library has a ton of info. This is the ONLY Forum in my book! 49ccscoot.com for Life!!! Lol.
|
|
