|
|
Post by musturbo on Sept 14, 2011 19:44:41 GMT -5
|
|
|
|
Post by 90GTVert on Sept 14, 2011 19:53:08 GMT -5
|
|
|
|
Post by musturbo on Sept 14, 2011 19:59:15 GMT -5
thanks for your help
|
|
|
|
Post by 90GTVert on Sept 14, 2011 21:31:46 GMT -5
NP. Looking forward to the pics.
|
|
|
|
Post by musturbo on Sept 18, 2011 17:03:04 GMT -5
thanks again
|
|
|
|
Post by 90GTVert on Sept 18, 2011 17:28:04 GMT -5
Nice work. Looks very clean. Great vid! :burnout:
|
|
Tweak09
Scoot Enthusiast
2011 Yamaha Zuma
Posts: 125
|
Post by Tweak09 on Sept 18, 2011 18:03:31 GMT -5
Very nice. I love the stretched look.
|
|
|
|
Post by tour96se on Oct 21, 2011 19:48:37 GMT -5
any info on this? is it just a long case in place of the short case with a longer strut?
|
|
|
|
Post by 90GTVert on Oct 21, 2011 20:16:19 GMT -5
The Triton is a long case stock, so it's a real stretch. Otherwise, hopefully musturbo will be back around to answer.
|
|
Tweak09
Scoot Enthusiast
2011 Yamaha Zuma
Posts: 125
|
Post by Tweak09 on Oct 22, 2011 7:10:51 GMT -5
|
|
|
|
Post by shakerdriver on Oct 22, 2011 8:22:56 GMT -5
It does look good.
|
|
|
|
Post by 2strokd on Oct 24, 2011 8:27:29 GMT -5
I hope he didnt use those Kiesler subframe stretches. Those things are dangerous! Ive heard allota bad about them making the scoot too flimsy and dangerous.
Looks real good tho :thumb:
|
|
|
|
Post by Thebatman on Oct 30, 2011 8:21:35 GMT -5
That is a nice scooter... Great burnout....Imma assume that burn outs are done best with the oem contra....lol
|
|
|
|
Post by tour96se on Oct 30, 2011 15:45:46 GMT -5
does anyone produce stretch kits? i was looking at those manifold extension brackets posted up higher, but not interested if they aren't safe.
|
|
|
|
Post by musturbo on Nov 7, 2011 15:41:59 GMT -5
We moved all of the mounting brackets 6 inches further back on the frame and re-welded them. I had to re route the throttle/oil cable and buy a longer rear brake cable but that was it. All the plastic is in for paint, going for the gunmetal/ flat black look and still trying to get the ride height where i like it. Will post pics when complete. If you have access to a good welder the stretch was not hard at all.
|
|
