Need help .. not sure where to post it looked around

[johnnyroscoe]

I have a Honda ruckus the wires to the enrichment and the throttle position sensor were cut, The plastic and on the harness side is gone I have the wires but don’t know where they go , I know what the throttle position sensor looks like and I know what the enrichment sensor looks like just don’t know what wire goes on what side .Stock carb stock wiring

[Zino]

I am not a 4 stroke guy but here is a copy of the ruckus service manual to help you track down the fix .
www.motorscooterguide.net/Manuals/Honda_NPS50_Service_Manual.pdf

[johnnyroscoe]

Thanks , been thru that manual , they don’t show color of wires , in any order of position.. like if wires were pulled out of connector where do they go back .

[johnnyroscoe]

If anyone can see in there stock ruckus what colors go where I would appreciate it . I can see on the schematic yellow blue and yellow red go on the outside and the blue green goes in the middle but I don’t know if it matters which way . Like if the yellow red needs to be on the right side of the center or the left side I don’t know

[johnnyroscoe]

I was speaking of the throttle position sensor on a Honda ruckus above

[GrumpyUnk]

johnnyr can you wander over to a Honda dealership and take a peek of a Rukus on the showroom floor? I'd take a camera(phone) and stuff it under the seat to take a pic as needed.
Do you know anyone that owns a similar model? Sorry, I have no access to one or I'd take a pic.
tom

[lilpinny]

I'd also try Reddit. Lots of people have stock rucks over there. r/ruckus

[tydeancustoms]

Only carb pic I have of one of our stock Rucks. I don't have any stock Rucks any longer but maybe this one pic will help?  Wires appear to be black and blue??

[tydeancustoms]

[Happypancake!]

[tydeancustoms]