mybad
Scoot Enthusiast
Scooter Enthusiest from Salem Massachussetts USA, SR50 Malossi Replica ,Derbi Predator,and bunch of
Posts: 130
|
Post by mybad on Jul 6, 2021 18:21:14 GMT -5
Ho guys I was wondering if one of you that did the ditech to carb conversion can tell me how you routed your fuel lines ? 1 to the return but did you cut it and run the clear line close to the tank ? And other side of the T did you run to the fuel pump? Also do I still use the fuel pump? I'd like to eliminate it but the kit dont come with an adapter to adapt the size down . A photo of the routing suggestions would be awesome just to give me an idea of how I want to route it. Hope someone can help.  |
|
mybad
Scoot Enthusiast
Scooter Enthusiest from Salem Massachussetts USA, SR50 Malossi Replica ,Derbi Predator,and bunch of
Posts: 130
|
Post by mybad on Jul 6, 2021 19:04:33 GMT -5
Ugh . Why dont this Mallossi conversion kit come with an adapter for the big fuel line to the new small fuel line ? They want me to keep my fuel pump in ? I hope not inwas planning on selling it as I just paid a fortune for it and used it for like 2 quick rides. Can someone please tell me if they ran the new Mallossi fuel lines from the carb conversion kit (the T lines ) directly to the tank ? Or after the pump. The directions dont say anything regarding that and I want this to look clean. Hoping someone can answer soon because I finally got some time down the basement to work on it but not much time. If an adapter is needed can I just grab one from a HomeDepot? If so anyone happen to know the size ? My tank is full of gas so taking it apart in the basement cant happen .
Help will be highly appreciated. Thanks guys .
|
|
|
|
Post by captincvmn on Jul 6, 2021 22:47:08 GMT -5
The carb will only need gravity feed from the tank. It won’t accept any pumped pressure
|
|
mybad
Scoot Enthusiast
Scooter Enthusiest from Salem Massachussetts USA, SR50 Malossi Replica ,Derbi Predator,and bunch of
Posts: 130
|
Post by mybad on Jul 10, 2021 4:29:39 GMT -5
The carb will only need gravity feed from the tank. It won’t accept any pumped pressure Thank you. I went to Home depot and got a 3/4 to 3/8 adapter and got it sorted out . |
|
|
|
Post by benedetto6718 on Mar 8, 2024 10:11:01 GMT -5
The carb will only need gravity feed from the tank. It won’t accept any pumped pressure Thank you. I went to Home depot and got a 3/4 to 3/8 adapter and got it sorted out . |
|
|
|
Post by benedetto6718 on Mar 8, 2024 10:11:47 GMT -5
Thank you. I went to Home depot and got a 3/4 to 3/8 adapter and got it sorted out . Hello, I am doing the same thing on mine I had a question about the small hose that came out more or less of the same parts of the tank what did you do with that one? |
|
