|
|
Post by zafirovski96 on Feb 17, 2024 13:39:16 GMT -5
So i have this problem on my aprilia sr50 r where i try to change my rear brake pads. One of the pistons seems like it is stuck completely. I tried draining my brake fluid in case it will get loose ,but same problem. Can someone help? Thanks.
|
|
|
|
Post by aeroxbud on Feb 17, 2024 15:58:42 GMT -5
You need the fluid to push the piston out. Or you can take the caliper off as it's drained. Then use an air line to free the piston. Keep your hands out the way of the piston if using an air line
Is it very corroded? If so you might need a rebuild kit once it's out.
|
|
