|
|
Post by drawkward on Feb 19, 2010 12:04:47 GMT -5
It fell onto the garage floor while I was removing the floor board and the plastic under the battery. 
|
|
|
|
Post by shiftless on Feb 19, 2010 13:22:15 GMT -5
Can't tell the size of it by the pic, but it looks like a keeper/spacer that goes on the bolt that holds the handlebars in place where they bolt to the steering stem  If it is.... don't ride till you fix it !! (dont want your bars coming off  ) |
|
|
|
Post by drawkward on Feb 19, 2010 13:32:24 GMT -5
Shit, my mistake. This new camera my aunt gave me is such a POS. I need to get up to the store and pick a new one up. Oh well, hopefully you can still tell, if not - it's a quarter.  |
|
|
|
Post by stepthrutuner on Feb 19, 2010 14:00:46 GMT -5
Judging from where it came from, It may be a spacer/rest that separates the floorboard from the frame tubes.
|
|
|
|
Post by shiftless on Feb 19, 2010 17:41:01 GMT -5
Look familiar ??  It could have fallen & made its way down the plastic to the floorboard area  |
|
|
|
Post by Fox on Feb 19, 2010 18:19:21 GMT -5
Maybe it was dropped in there in the factory and rather than dig it out they left it in there and used another one on the bars.
|
|
|
|
Post by 90GTVert on Feb 19, 2010 19:24:29 GMT -5
I'd say it's worth taking a peek to be sure. Maybe just shine a light in the crack between the gauge cowling and the front fairing to see if the nut is on the handlebars.
|
|
|
|
Post by drawkward on Feb 19, 2010 20:50:33 GMT -5
Maybe it was dropped in there in the factory and rather than dig it out they left it in there and used another one on the bars. I think your right. But This is still a little mysterious to me. I checked my bars to see if the nut was loose or missing. Everything was nice and tight. My bars don't attach like this one... They attach more like Brent's below. Like a clamp, I guess.  |
|
)
