|
Post by Grom Reaper on Apr 18, 2014 14:16:56 GMT -5
Haha, yes. And I've already thought of rc nitro fuel. That's the beauty of what I created, I can run dry nos AND ANY liquid fuel power adder I want :-D. I think you can get it at up to 30% nitro.
|
|
|
Post by FrankenMech on Apr 18, 2014 14:28:27 GMT -5
Great minds.....
|
|
|
Post by 90GTVert on Apr 18, 2014 15:25:42 GMT -5
|
|
|
Post by craisin on Apr 18, 2014 15:31:00 GMT -5
i gave up on a friend cause he has ideas all the time The last one i listened too was he was going to get a Mazda Rotary running on diesel. But when i first met him he told me that one and said he was going to have it going by Christmas.
I have known him for 3 Christmases now and i havent seen a Rotary
With me its lack of money but often there is something you could buy that was cheaper in the long run
|
|
|
Post by Grom Reaper on Apr 18, 2014 17:51:42 GMT -5
I've already run dry shot nos. As well as sprayed 91% rubbing alcohol( not a big boost ). And just to be clear, I'm experimenting with power adders not a new fuel to solely run off of.
|
|
|
Post by Grom Reaper on Apr 18, 2014 17:52:40 GMT -5
When the weather clears up I'm trying de-natured alcohol.
|
|
|
Post by FrankenMech on Apr 18, 2014 23:25:13 GMT -5
FUN!!! I always lack for money but it hasn't stopped me yet. I have dozens of 'projects' going. Pieces parts, notes, and sketches everywhere. My house is a mad scientist's lair. The strokes and ET really slowed me down but haven't stopped me yet. Remember: To invent, you need a good imagination and a pile of junk. -Thomas A. Edison Add to that, -Money! -Me
|
|
|
Post by oldsman on Apr 19, 2014 2:13:20 GMT -5
One project I have going is custom made rods I have one almost done but have been too busy to get it finished.
|
|
|
Post by dan50 on Apr 19, 2014 2:27:51 GMT -5
|
|
|
Post by FrankenMech on Apr 19, 2014 11:20:20 GMT -5
Regear that bad boy for 0-50 performance!!!
|
|
|
Post by craisin on Apr 20, 2014 2:57:05 GMT -5
So i assume this is a DC powered mod?
|
|
|
Post by Grom Reaper on Apr 20, 2014 9:04:46 GMT -5
Yup! And let me be a little clearer, the alcohol is not for combustion. But rather to rapidly cool and condense the air charge going into the carb. But I can use this same set up for gasoline injection to even out the leaning out from dry nos, or for nitro methanol.
|
|
|
Post by AlexF2294 on Apr 20, 2014 21:11:10 GMT -5
|
|