|
|
Post by dudescoot on Oct 8, 2014 18:55:51 GMT -5
Did some painting today. On my Ruckus clone this is the one I just did the 80cc BBK on thought if share some before and afters and get some opinions. It's hard to see from the pictures but I also did the gas tank in bed liner.   |
|
|
|
Post by scooterpimp on Oct 8, 2014 19:00:33 GMT -5
Two thumbs up  |
|
|
|
Post by katastroff on Oct 8, 2014 19:16:12 GMT -5
Way better in black!!!
euhhh... No shroud?
|
|
|
|
Post by dudescoot on Oct 8, 2014 19:32:53 GMT -5
The black looked cheap and had an ugly gold flake to it plus everyone has a black one. And what shroud?
|
|
|
|
Post by katastroff on Oct 8, 2014 19:50:30 GMT -5
The shroud is the plastic thing that goes around your cylinder. Its your cooling system.
|
|
|
|
Post by katastroff on Oct 8, 2014 19:57:31 GMT -5
The blue is nice too, im just a black things kind of guy.  |
|
|
|
Post by themajekalbum on Oct 8, 2014 20:01:25 GMT -5
I'm a fan on all black with accent colors, just needs something in the back to balance it out.
|
|
|
|
Post by dudescoot on Oct 8, 2014 20:18:43 GMT -5
Just haven't gotten around to putting it back on I figured since this thing is wide open to the nice wind it's be fine
|
|
|
|
Post by dudescoot on Oct 8, 2014 20:35:55 GMT -5
I need to get busy posting all the pics from my BBK build but for now this is my favorite   |
|
|
|
Post by 2TDave on Oct 8, 2014 20:36:09 GMT -5
You want those shrouds on. They keep the air circulating around the cylinder.
|
|
|
|
Post by dudescoot on Oct 8, 2014 20:47:46 GMT -5
You want those shrouds on. They keep the air circulating around the cylinder. I guess that's gonna be my next task tomorrow. |
|
|
|
Post by scooterpimp on Oct 8, 2014 20:57:02 GMT -5
Yup , ya dont want that new cyl. & piston to match the new paint job!  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 9, 2014 19:04:15 GMT -5
Did some painting today. On my Ruckus clone this is the one I just did the 80cc BBK on thought if share some before and afters and get some opinions. It's hard to see from the pictures but I also did the gas tank in bed liner. I fail to understand why people leave the cooling shrounds off of these forced air cooled motors. these motors do not have oil coolers. Is it from lack of experience? This engine will not run for long. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 9, 2014 19:06:05 GMT -5
Just haven't gotten around to putting it back on I figured since this thing is wide open to the nice wind it's be fine you could not be more wrong. |
|
