|
|
Post by iwiketuddlz on Jun 17, 2015 4:50:41 GMT -5
Thanks spaz!!! And yea I have literally cried with some of the shot I have been threw with this build but I love the end result lol it's running great now!!!!
And the wife ... Yea do t get me started lmao lets just say she don't like my scoot!!!
And I appreciate the offer for help I will takbe you up ion that!!!
|
|
|
|
Post by joeorange on Jun 17, 2015 9:28:40 GMT -5
check out scoot-tuning.com out for the wheel adapter. they have them for the bws, aerox and the 1e40qmb.
|
|
|
|
Post by spaz12 on Jun 17, 2015 16:54:48 GMT -5
 That part is no longer available and he is wanting to convert to disk brake. He couldn't do that with that hub. I'm not sure how many splines you have but the Aerox wheel is 16 spline and roughly 16.8mm. I say roughly because my damn caliper is acting weird. It showed as little as 16.68 up to 16.86. I'm not sure if the batteries are dying or what. He needs a hub like this  17.35 is the id of the hub |
|
|
|
Post by iwiketuddlz on Jun 17, 2015 17:02:01 GMT -5
Thanks guys I do have a aerox wheel and hub, disc and rotor., but now I see it won't fit my axle!!!! So I now am looking for a set of aerox cases!!!
|
|
|
|
Post by moofus02 on Jun 17, 2015 17:09:22 GMT -5
A cpi disc brake wheel hub will fit your axel and the Aerox wheel. You can get a gear cover for the clones with the caliper mount or use a voca caliper adapter with a stage 6 4 piston caliper. If you don't use the Aerox disc hub i would be interested in it. It fits the adly motto 90 axle i have then i could use the voca to go rear disc on my adly
|
|
|
|
Post by spaz12 on Jun 17, 2015 17:18:18 GMT -5
|
|
|
|
Post by iwiketuddlz on Jun 17, 2015 18:59:55 GMT -5
Sweet mmmm?? A bit more than I want to spend but hey can't take it with you!!and Moofus I'll let you know about that hub asap.. Can't decide what I route Ima take ATM... Thanks guys
Also my parts are not even in route yet so it's going to be a while I'm sure.. I'm in no rush I just really want rear disc lol
|
|
|
|
Post by spaz12 on Jun 17, 2015 21:21:16 GMT -5
Haha, I know the feeling man. I just had to have that sexy ass rear disk too!  |
|
|
|
Post by spaz12 on Jun 17, 2015 21:27:45 GMT -5
And didn't it scare you at least a little bit to mill out the crank area? I went with the MHR 77 because I was so worried about screwing up my cases. Aerox cases are freaking expensive and harder then hell to come by. Did I mention, EXPENSIVE?
|
|
|
|
Post by filip on Jun 18, 2015 1:33:48 GMT -5
Anyone have a teleport machine? We have aerox cases all over the place. Good luck tuddlz  |
|
|
|
Post by iwiketuddlz on Jun 18, 2015 4:35:13 GMT -5
Thanks guys but I have a member who is helping me out with the parts like all the parts for rear disc for a reasonable price!!!! Woot woot just gotta wait to see what shipPing will cost  ?but all in time if I have to I'll borrow the money to pay for it hell I was just told by my supervisor that hours are cut?!!!!!! To 40 a week damnit man this sux!!!! So it's on hold for now anyway |
|
|
|
Post by iwiketuddlz on Jul 14, 2015 17:34:26 GMT -5
  Post just dropped this off!!!! I love scooter parts!!! |
|
|
|
Post by iwiketuddlz on Jul 14, 2015 18:06:33 GMT -5
  Well I cut off a bracket and she fits!!!! I'll will be removing my fan I just got because I don't see the need this radiator is hugh!!!! I love it So pretty!!! |
|
|
|
Post by spaz12 on Jul 14, 2015 18:09:42 GMT -5
Ahhh, the smell of new scooter parts  |
|
|
|
Post by 2TDave on Jul 14, 2015 19:23:06 GMT -5
What are you going to do about getting the front panel on? Looks like you'd have to cut down into the light.
|
|
?but all in time if I have to I'll borrow the money to pay for it hell I was just told by my supervisor that hours are cut?!!!!!! To 40 a week damnit man this sux!!!! So it's on hold for now anyway 