MustashMike
Scoot Member
Still alive & well
Posts: 89
Location: Indianapolis
|
Post by MustashMike on Jan 13, 2015 13:19:22 GMT -5
I bought a wrecked Keeway Goccia (Goat Cheese) for parts. The long case 2-T originally had 16” wheels and massive (135mm) drum brakes. I’m attempting to use 12” wheels but that shoe size = no-go. Found a trans case half that matches and has standard 105mm brakes. All transmission parts swap perfectly – only need the shoe pivot point (post). Original is too short. Any Ideas / source? MIKE
|
|
|
Post by niz76 on Jan 13, 2015 13:27:02 GMT -5
|
|
MustashMike
Scoot Member
Still alive & well
Posts: 89
Location: Indianapolis
|
Post by MustashMike on Jan 13, 2015 14:06:39 GMT -5
WOW - that was quick. Need the stationary (fixed) pin not the actuator cam. The pin's nut is in the transmission and had an “O” ring.
|
|
|
Post by 90GTVert on Jan 13, 2015 14:55:43 GMT -5
|
|
MustashMike
Scoot Member
Still alive & well
Posts: 89
Location: Indianapolis
|
Post by MustashMike on Jan 14, 2015 13:52:24 GMT -5
PICTURES - Yes, I love illustrations. Words, not so much. Like the transmission half - the web site said MISSION COVER. Like a Seal Team mission cover I thought? but THX MAN !
|
|
MustashMike
Scoot Member
Still alive & well
Posts: 89
Location: Indianapolis
|
Post by MustashMike on Jan 25, 2015 12:38:16 GMT -5
I found a source for my part. I was on PARTS FOR SCOOTERS and they now do I.M. support. Started a chat asking the operator to measure a GY6 pin. No-Go but then the chat went to "I have this long case 2 stroke clone and . . . ". He said hang on and let me do some research. Five minutes later he came back with exactly what I needed, complete with O ring and lock nut. No part number to share but perfect fit ! Many thanks to DEXTER at PARTS FOR SCOOTERS
|
|
|
Post by Sitticuss on Jan 25, 2015 13:53:03 GMT -5
I found a source for my part. I was on Parts For Scooters and they now do I.M. support. Started a chat asking the operator to measure a GY6 pin. No-Go but then the chat went to "I have this long case 2 stroke clone and . . . ". He said hang on and let me do some research. Five minutes later he came back with exactly what I needed, complete with O ring and lock nut. No part number to share but perfect fit ! Many thanks to DEXTER at Parts For Scooters
Seriously..Last time I tried with them I was out of luck...Make sure you tighten that thing down good
|
|